OWC 128GB DDR4 2400MHz CL17 4Rx4 ECC LRDIMM 1.2V 288-pin server RAM
- 128GB
- 288-Pin DDR4 ECC LR…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Dual-channel 256GB DDR4 ECC LRDIMM kit running at 2666MHz CL19 for servers, workstations and NAS systems
Capacity 256GB (2 x 128GB)
This OWC kit provides 256GB of DDR4 ECC load-reduced memory across two 128GB modules. It runs at 2666MHz with CL19 latency and 1.2V operation. The 288-pin LRDIMM form factor is built for servers, workstations and NAS systems that require registered ECC memory with 4Rx4 organisation.
The dual-channel kit suits administrators upgrading older DDR4 platforms that support load-reduced DIMMs and 128GB per slot. It will not work in standard desktop boards, consumer laptops or any system that only accepts unbuffered non-ECC modules. Buyers who need unbuffered ECC or standard UDIMMs should look elsewhere.
Modules insert into 288-pin DDR4 DIMM sockets like any registered DIMM; no heat spreader means clearance is rarely an issue. The kit is backward compatible with 2133MHz and 2400MHz bus speeds. The most common issue is attempting to mix these LRDIMMs with unbuffered memory or installing them in a board that does not support load-reduced topology.
| Brand | OWC |
|---|---|
| Part Number | 2L6D44R4256P |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The modules need a DDR4 server or workstation board that supports 288-pin ECC load-reduced DIMMs at 1.2 V; they will not work in standard desktop motherboards or with unbuffered memory.
Yes, the kit is backward compatible with 2133 MHz and 2400 MHz DDR4 ECC LRDIMM modules, though the system will operate all memory at the lowest common speed.
Check the BIOS or UEFI memory information screen — it should show 256 GB total, 2666 MT/s data rate, CL19 timings and ECC enabled for each 128 GB module.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?