OWC 128GB DDR4 2400MHz CL17 4Rx4 ECC LRDIMM 1.2V 288-pin server RAM
- 128GB
- 288-Pin DDR4 ECC LR…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
Dual-channel 256GB DDR4 ECC LRDIMM kit running at 2666MHz CL19 for servers, workstations and NAS systems
Capacity 256GB (2 x 128GB)
This OWC kit provides 256GB of DDR4 ECC load-reduced memory across two 128GB modules. It runs at 2666MHz with CL19 latency and 1.2V operation. The 288-pin LRDIMM form factor is built for servers, workstations and NAS systems that require registered ECC memory with 4Rx4 organisation.
The dual-channel kit suits administrators upgrading older DDR4 platforms that support load-reduced DIMMs and 128GB per slot. It will not work in standard desktop boards, consumer laptops or any system that only accepts unbuffered non-ECC modules. Buyers who need unbuffered ECC or standard UDIMMs should look elsewhere.
Modules insert into 288-pin DDR4 DIMM sockets like any registered DIMM; no heat spreader means clearance is rarely an issue. The kit is backward compatible with 2133MHz and 2400MHz bus speeds. The most common issue is attempting to mix these LRDIMMs with unbuffered memory or installing them in a board that does not support load-reduced topology.
| Brand | OWC |
|---|---|
| Part Number | 2L6D44R4256P |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The modules need a DDR4 server or workstation board that supports 288-pin ECC load-reduced DIMMs at 1.2 V; they will not work in standard desktop motherboards or with unbuffered memory.
Yes, the kit is backward compatible with 2133 MHz and 2400 MHz DDR4 ECC LRDIMM modules, though the system will operate all memory at the lowest common speed.
Check the BIOS or UEFI memory information screen — it should show 256 GB total, 2666 MT/s data rate, CL19 timings and ECC enabled for each 128 GB module.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?