OWC 16GB DDR4 2133MHz CL15 1.2V 260pin Non-ECC SODIMM memory upgrade
- 16GB
- 260-Pin DDR4 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
16 GB DDR4 SODIMM at 2133 MHz CL15, 1.2 V, validated for the HP Retail System MP9 G2
This 16GB DDR4 2133MHz module is built specifically for the HP Retail System MP9 G2. It arrives new and ready to install in the 260-pin SO-DIMM slot. The CL15 latency and 1.2V operation match the platform requirements. Buyers who need ECC support or a different form factor cannot use this module.
The unbuffered 2Rx8 design drops into the existing memory slot without extra cables or brackets. JEDEC compliance at PC4-17000 keeps the upgrade warranty safe for the HP system. No heat spreader means it clears tight chassis spaces in the mini desktop. Builders who need registered DIMMs or a 288-pin desktop format must look elsewhere.
Rated CL15 at 1.2V gives consistent bandwidth during long multitasking sessions. The non-ECC layout suits typical retail workloads where error correction is not required. Modules are tested to meet OEM specifications for sustained operation. Users who demand higher frequencies or lower latencies than the platform specifies will not benefit.
| Brand | OWC |
|---|---|
| Part Number | 2S1D42R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP Retail System MP9 G2 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module operates at DDR4 2133MHz with CL15 timing and 1.2V; latency is fixed by the JEDEC specification and does not change under sustained load.
At 1.2V the module runs at standard DDR4 voltage; the unbuffered 2Rx8 design has no heat spreader, so it relies on system airflow for cooling.
Yes, the MP9 G2 needs an available 260-pin DDR4 SO-DIMM slot; the module is non-ECC, unbuffered, and keyed for that socket.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?