OWC 16GB DDR4 2133MHz CL15 1.2V 260pin Non-ECC SODIMM memory upgrade
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16 GB DDR4 SODIMM at 2133 MHz CL15, 1.2 V, validated for the HP Retail System MP9 G2
This 16GB DDR4 2133MHz module is built specifically for the HP Retail System MP9 G2. It arrives new and ready to install in the 260-pin SO-DIMM slot. The CL15 latency and 1.2V operation match the platform requirements. Buyers who need ECC support or a different form factor cannot use this module.
The unbuffered 2Rx8 design drops into the existing memory slot without extra cables or brackets. JEDEC compliance at PC4-17000 keeps the upgrade warranty safe for the HP system. No heat spreader means it clears tight chassis spaces in the mini desktop. Builders who need registered DIMMs or a 288-pin desktop format must look elsewhere.
Rated CL15 at 1.2V gives consistent bandwidth during long multitasking sessions. The non-ECC layout suits typical retail workloads where error correction is not required. Modules are tested to meet OEM specifications for sustained operation. Users who demand higher frequencies or lower latencies than the platform specifies will not benefit.
| Brand | OWC |
|---|---|
| Part Number | 2S1D42R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP Retail System MP9 G2 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module operates at DDR4 2133MHz with CL15 timing and 1.2V; latency is fixed by the JEDEC specification and does not change under sustained load.
At 1.2V the module runs at standard DDR4 voltage; the unbuffered 2Rx8 design has no heat spreader, so it relies on system airflow for cooling.
Yes, the MP9 G2 needs an available 260-pin DDR4 SO-DIMM slot; the module is non-ECC, unbuffered, and keyed for that socket.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟