OWC 8GB DDR4 2133MHz CL15 1.2V 260pin Non-ECC SODIMM memory upgrade for HP ProDesk 400 G2 Mini 600 G2 Mini
- 8GB
- 260-Pin DDR4 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
8GB DDR4 2133MHz CL15 UDIMM upgrade for HP Envy Phoenix 860 series desktops
This 8GB DDR4 2133MHz CL15 UDIMM module is validated for HP ENVY Phoenix models 860-001no, 860-001ns, 860-002la, 860-002nc and 860-002nf. It suits owners of these desktops who need a straightforward memory increase. Builders working on other platforms or requiring ECC support should select a different module.
The module operates at the standard 1.2V DDR4 voltage without a heat spreader. As an unbuffered non-ECC DIMM it adds minimal load to the memory controller and runs silently with no active cooling required. Power draw scales with the 2133MHz JEDEC specification under normal workloads.
Full JEDEC and RoHS compliance ensures a warranty-safe upgrade that meets OEM specifications. The manufacturer provides a limited lifetime warranty with free technical support and an advanced replacement programme. No bundled software or accessories are included with the memory module itself.
| Brand | OWC |
|---|---|
| Part Number | 2U1D42R808GB |
| Capacity | 8GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP ENVY Phoenix 860-001no HP ENVY Phoenix 860-001ns HP ENVY Phoenix 860-002la HP ENVY Phoenix 860-002nc HP ENVY Phoenix 860-002nf |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power off, open the case, align the notch on the module with the slot key, press firmly until both retention clips click shut, then power on and verify 8GB appears in BIOS — the step most people miss is seating the module fully so both clips engage automatically.
No scheduled maintenance is required; keep interior dust-free for airflow, and replace only if memory errors appear or capacity becomes insufficient for your workload.
The JEDEC-rated 2133MHz speed and CL15 latency are the fixed operating limits; the module does not exceed these specifications during prolonged use.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?