OWC 8GB DDR4 2133MHz CL15 1.2V 260pin Non-ECC SODIMM memory upgrade for HP ProDesk 400 G2 Mini 600 G2 Mini
- 8GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
8GB DDR4 2133MHz CL15 UDIMM upgrade for HP Envy Phoenix 860 series desktops
This 8GB DDR4 2133MHz CL15 UDIMM module is validated for HP ENVY Phoenix models 860-001no, 860-001ns, 860-002la, 860-002nc and 860-002nf. It suits owners of these desktops who need a straightforward memory increase. Builders working on other platforms or requiring ECC support should select a different module.
The module operates at the standard 1.2V DDR4 voltage without a heat spreader. As an unbuffered non-ECC DIMM it adds minimal load to the memory controller and runs silently with no active cooling required. Power draw scales with the 2133MHz JEDEC specification under normal workloads.
Full JEDEC and RoHS compliance ensures a warranty-safe upgrade that meets OEM specifications. The manufacturer provides a limited lifetime warranty with free technical support and an advanced replacement programme. No bundled software or accessories are included with the memory module itself.
| Brand | OWC |
|---|---|
| Part Number | 2U1D42R808GB |
| Capacity | 8GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP ENVY Phoenix 860-001no HP ENVY Phoenix 860-001ns HP ENVY Phoenix 860-002la HP ENVY Phoenix 860-002nc HP ENVY Phoenix 860-002nf |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Power off, open the case, align the notch on the module with the slot key, press firmly until both retention clips click shut, then power on and verify 8GB appears in BIOS — the step most people miss is seating the module fully so both clips engage automatically.
No scheduled maintenance is required; keep interior dust-free for airflow, and replace only if memory errors appear or capacity becomes insufficient for your workload.
The JEDEC-rated 2133MHz speed and CL15 latency are the fixed operating limits; the module does not exceed these specifications during prolonged use.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟