暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge contacts

OWC

OWC 2U1D42R808GB 8GB DDR4 2133MHz CL15 1.2V 288pin UDIMM memory upgrade

SKU CH-TZV2-GDZZQ

8GB DDR4 2133MHz CL15 UDIMM upgrade for HP Envy Phoenix 860 series desktops

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boost PC responsiveness with 8GB DDR4 2133MHz CL15 module
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Low 1.2V operation cuts power draw and heat
  • 288-pin unbuffered UDIMM fits HP Envy Phoenix 860 series
  • Tested to meet or exceed OEM specifications

OWC DDR4 2133MHz CL15 for HP ENVY Phoenix

This 8GB DDR4 2133MHz CL15 UDIMM module is validated for HP ENVY Phoenix models 860-001no, 860-001ns, 860-002la, 860-002nc and 860-002nf. It suits owners of these desktops who need a straightforward memory increase. Builders working on other platforms or requiring ECC support should select a different module.

Thermals noise and power draw

The module operates at the standard 1.2V DDR4 voltage without a heat spreader. As an unbuffered non-ECC DIMM it adds minimal load to the memory controller and runs silently with no active cooling required. Power draw scales with the 2133MHz JEDEC specification under normal workloads.

JEDEC compliance and lifetime warranty

Full JEDEC and RoHS compliance ensures a warranty-safe upgrade that meets OEM specifications. The manufacturer provides a limited lifetime warranty with free technical support and an advanced replacement programme. No bundled software or accessories are included with the memory module itself.

特長

  • Boost PC responsiveness with 8GB DDR4 2133MHz CL15 module
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Low 1.2V operation cuts power draw and heat
  • 288-pin unbuffered UDIMM fits HP Envy Phoenix 860 series
  • Tested to meet or exceed OEM specifications

仕様

BrandOWC
Part Number2U1D42R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-001no
HP ENVY Phoenix 860-001ns
HP ENVY Phoenix 860-002la
HP ENVY Phoenix 860-002nc
HP ENVY Phoenix 860-002nf

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 288-pin DDR4 UDIMM in my HP ENVY Phoenix 860-001no and what step is often missed?

Power off, open the case, align the notch on the module with the slot key, press firmly until both retention clips click shut, then power on and verify 8GB appears in BIOS — the step most people miss is seating the module fully so both clips engage automatically.

What maintenance or replacement will the 8GB DDR4 2133MHz CL15 module need over time?

No scheduled maintenance is required; keep interior dust-free for airflow, and replace only if memory errors appear or capacity becomes insufficient for your workload.

What limit appears first when the 1.2V 2Rx8 Non-ECC UDIMM runs under sustained load?

The JEDEC-rated 2133MHz speed and CL15 latency are the fixed operating limits; the module does not exceed these specifications during prolonged use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。