OWC 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM for HP Z2 G4 SFF
- 8GB
- 288-Pin DDR4 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
8GB DDR4 2666MHz CL19 1.2V UDIMM upgrade for HP OMEN X 900-250ng, 900-251ng, 900-280nz, 900-284nz and 900-290
This OWC memory module adds 8GB of DDR4 capacity at 2666MHz with CL19 timing. It is built for HP OMEN X desktops including the 900-250ng, 900-251ng, 900-280nz, 900-284nz and 900-290 models. The 1.2V unbuffered non-ECC design fits standard 288-pin desktop slots. Builders needing ECC error correction or registered modules should look elsewhere.
The module meets JEDEC standard specifications and is RoHS compliant, ensuring a warranty-safe upgrade that follows industry rules. Backward compatibility lets it run at 2133MHz or 2400MHz if the system requires a lower speed. No extra software, heat spreaders or accessories are bundled with this stick.
Installation is a straightforward DIY task on compatible HP OMEN X systems; align the notch and press until the clips lock. The most common issue is mixing speeds, causing the system to downclock all memory to the slowest module. Systems that require registered or ECC memory will not accept this unbuffered non-ECC stick.
| Brand | OWC |
|---|---|
| Part Number | 2U6D41R808GB |
| Capacity | 8GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP OMEN X 900-250ng HP OMEN X 900-251ng HP OMEN X 900-280nz HP OMEN X 900-284nz HP OMEN X 900-290 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module is a solid-state component with no moving parts and no heat spreader, so it requires no routine maintenance and is designed to last the lifetime of the system under normal use.
The primary limit is the CL19 latency timing at 2666MHz; the module will not exceed this rated speed or tighten latency without manual overclocking, which is not supported by the HP OMEN X platform.
Operating at 1.2V without a heat spreader, the module draws minimal power and generates low heat, staying within standard JEDEC thermal limits for continuous desktop operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?