暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

OWC

OWC 2U6D41R808GB 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM memory upgrade

SKU CH-N3C0-PB3JY

8GB DDR4 2666MHz CL19 1.2V UDIMM upgrade for HP OMEN X 900-250ng, 900-251ng, 900-280nz, 900-284nz and 900-290

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • Boosts system responsiveness with 8GB DDR4 2666MHz CL19 memory
  • Guaranteed fit for HP OMEN X 900-250ng, 900-251ng, 900-280nz, 900-284nz, 900-290
  • Runs efficiently at 1.2V standard DDR4 voltage
  • JEDEC compliant for warranty-safe upgrade
  • Simple DIY installation with 288-pin UDIMM form factor

OWC 8GB DDR4 2666MHz CL19 UDIMM

This OWC memory module adds 8GB of DDR4 capacity at 2666MHz with CL19 timing. It is built for HP OMEN X desktops including the 900-250ng, 900-251ng, 900-280nz, 900-284nz and 900-290 models. The 1.2V unbuffered non-ECC design fits standard 288-pin desktop slots. Builders needing ECC error correction or registered modules should look elsewhere.

JEDEC and RoHS compliant specification

The module meets JEDEC standard specifications and is RoHS compliant, ensuring a warranty-safe upgrade that follows industry rules. Backward compatibility lets it run at 2133MHz or 2400MHz if the system requires a lower speed. No extra software, heat spreaders or accessories are bundled with this stick.

Simple DIY installation in most cases

Installation is a straightforward DIY task on compatible HP OMEN X systems; align the notch and press until the clips lock. The most common issue is mixing speeds, causing the system to downclock all memory to the slowest module. Systems that require registered or ECC memory will not accept this unbuffered non-ECC stick.

特長

  • Boosts system responsiveness with 8GB DDR4 2666MHz CL19 memory
  • Guaranteed fit for HP OMEN X 900-250ng, 900-251ng, 900-280nz, 900-284nz, 900-290
  • Runs efficiently at 1.2V standard DDR4 voltage
  • JEDEC compliant for warranty-safe upgrade
  • Simple DIY installation with 288-pin UDIMM form factor

仕様

BrandOWC
Part Number2U6D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP OMEN X 900-250ng
HP OMEN X 900-251ng
HP OMEN X 900-280nz
HP OMEN X 900-284nz
HP OMEN X 900-290

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin DDR4 module need any maintenance or replacement during its service life?

The module is a solid-state component with no moving parts and no heat spreader, so it requires no routine maintenance and is designed to last the lifetime of the system under normal use.

What limit appears first when the CL19 2666MHz memory runs under sustained load?

The primary limit is the CL19 latency timing at 2666MHz; the module will not exceed this rated speed or tighten latency without manual overclocking, which is not supported by the HP OMEN X platform.

How much heat and power does the 1.2V 8GB UDIMM produce when running all day?

Operating at 1.2V without a heat spreader, the module draws minimal power and generates low heat, staying within standard JEDEC thermal limits for continuous desktop operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。