暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connectors

OWC

OWC 8GB DDR4 2400 CL17 1Rx8 288-pin UDIMM for QNAP TS-873U TS-873U-RP TS-877

SKU CH-HCZB-CKN0W

8GB DDR4 2400 CL17 UDIMM module validated for QNAP TS-873U, TS-873U-RP and TS-877 NAS systems

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 8GB capacity expands NAS multitasking headroom for heavier workloads
  • DDR4 2400 speed with CL17 latency keeps data flowing smoothly
  • 2V low-voltage operation reduces power draw and heat
  • JEDEC-standard compliant module ensures warranty-safe QNAP upgrades
  • Backward compatible with 2133MHz systems for flexible deployment

8GB DDR4 2400 Module for QNAP NAS

This OWC module provides 8GB of DDR4 2400 memory in a 288-pin UDIMM form factor. It operates at 1.2V with CL17 latency and a 1Rx8 rank configuration. The non-ECC unbuffered design matches the specifications for QNAP TS-873U, TS-873U-RP and TS-877 systems. JEDEC compliance ensures a warranty-safe upgrade path.

Suits QNAP NAS upgrades needing non-ECC UDIMMs

This module fits owners of the listed QNAP models who want to add 8GB of DDR4 2400 memory using a standard UDIMM slot. It is not for systems that require ECC registered DIMMs or SODIMM form factors. Buyers needing error-correcting code memory should look elsewhere. The single-rank layout works with the validated QNAP platforms.

CL17 latency at DDR4 2400 speed

The CAS latency of CL17 at 2400 MT/s defines the module's timing profile for the compatible QNAP NAS units. Backward compatibility with 2133 MHz operation is supported. This timing specification determines whether the module matches the system's memory controller requirements. No heat spreader is included on the PCB.

特長

  • 8GB capacity expands NAS multitasking headroom for heavier workloads
  • DDR4 2400 speed with CL17 latency keeps data flowing smoothly
  • 2V low-voltage operation reduces power draw and heat
  • JEDEC-standard compliant module ensures warranty-safe QNAP upgrades
  • Backward compatible with 2133MHz systems for flexible deployment

仕様

BrandOWC
Part Number2U4D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-873U
QNAP TS-873U-RP
QNAP TS-877

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much heat and power does the 1.2 V DDR4 2400 module draw when the NAS runs continuously?

The module operates at the standard DDR4 voltage of 1.2 V with no heat spreader, so thermal output stays low during all-day workloads.

What must the QNAP TS-873U already have for this 288-pin UDIMM to install and function?

An available 288-pin DDR4 UDIMM slot and a BIOS that accepts non-ECC unbuffered memory at CL17 timing.

Will this CL17 stick run stably alongside existing 2133 MHz modules in a TS-877?

Yes, the spec lists backward compatibility with 2133 MHz, so the faster module will down-clock to match the slower ones.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。