OWC 512GB (8x64GB) DDR4 2933 CL21 ECC RDIMM memory upgrade
- 512GB (8 x 64GB)
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
512 GB DDR4-2933 ECC load-reduced LRDIMM kit of four 128 GB modules for HP Synergy 480 and 660 Gen10 servers
Capacity 512GB (4 x 128GB)
This kit provides 512GB of DDR4 memory across four 128GB load-reduced DIMMs. It is built for HP Synergy 480 Gen10 and 660 Gen10 compute modules. The modules are ECC LRDIMM, not standard desktop RAM, and cannot mix with unbuffered or registered ECC memory.
Operating at 1.2V, the modules follow JEDEC DDR4 specifications for voltage and power. No heat spreaders are fitted, so airflow in the server chassis handles cooling. The load-reduced design reduces electrical load on the memory bus during typical operation.
Under continuous workloads the ECC circuitry corrects single-bit errors to maintain data integrity. The 4Rx4 organisation and CL21 latency remain stable at the rated 2933MHz speed. Backward compatibility allows operation at 2133MHz, 2400MHz and 2666MHz if the system requires lower speeds.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R4512S |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | HP Synergy 480 Gen10 HP Synergy 660 Gen10 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align each 288-pin module with the slot key notch, press firmly until the ejector tabs click. The common mistake is mixing these 4Rx4 load-reduced DIMMs with unbuffered or registered ECC memory, which the system will not support.
No scheduled maintenance is required for the modules themselves. Keep the server air filters clean so the 1.2V DIMMs stay within thermal limits. If a module fails, replace it with an identical 128GB 4Rx4 PC4-23400 CL21 LRDIMM to maintain matched ranks across the four slots.
The memory controller will down-clock the kit to 2666, 2400 or 2133 MHz if the processor or BIOS does not support the full 2933 MT/s data rate, so sustained throughput is capped at the highest speed the platform actually negotiates.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?