OWC 512GB (4x128GB) DDR4 2933MHz CL21 4Rx4 ECC Load Reduced LRDIMM 1.2V 288-pin Server RAM
- 512GB (4 x 128GB)
- 288-Pin DDR4 ECC LR…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 512GB quad-channel kit of four 128GB DDR4 3200MHz CL22 ECC load-reduced LRDIMMs for servers and workstations
Capacity 512GB (4 x 128GB)
This OWC kit delivers 512 GB of DDR4 ECC load-reduced memory across four 128 GB modules. It is built for servers, workstations and NAS systems that require registered DIMMs with error correction. The kit will not work in standard desktop computers or alongside unbuffered memory.
Each module uses the 288-pin LRDIMM form factor without a heat spreader, running at 1.2 V with a CL22 latency. The load-reduced design reduces electrical load on the memory controller, allowing higher density per channel in compatible server boards. Modules are rated for PC4-25600 at 3200 MHz.
Before ordering, confirm that your system accepts DDR4 ECC LRDIMMs and supports 4Rx4 modules at this capacity per slot. The memory is backward compatible with 2133, 2400, 2666 and 2933 MHz bus speeds, but the motherboard and CPU must explicitly support load-reduced registered DIMMs.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4512S |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit is rated DDR4 3200 (PC4-25600) with CL22 latency and will operate at up to 3200 MHz on a supporting platform.
They require DDR4 288-pin LRDIMM slots in a server, workstation or NAS system; they will not fit standard desktop DIMM sockets.
Populate all four modules in the correct channel order for the platform, enable ECC in the BIOS and do not mix them with unbuffered DIMMs.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?