Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

partaker

Partaker A19 12.1" IP65 Industrial All-in-One PC i3-10110U 16GB 512GB

SKU CH-WQX6-4GEHY

A 12.1" IP65-rated industrial all-in-one PC with a resistive multi-touch screen, Intel Core i3-10110U, 16GB DDR4 and a 512GB SATA SSD, running Windows 11 Pro in a fanless aluminium chassis

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeIntel Core i3 10th Gen
  • GPU/VGA TypeIntel UHD Graphics
  • Memory Capacity16GB DDR4
  • Maximum Memory Supported32 GB

CPU Type Intel Core i3 10th Gen

Memory Capacity 16GB DDR4

SSD 512GB

  • IP65 front panel resists dust and water jets
  • Fanless aluminium alloy chassis runs silently 24/7
  • Intel Core i3-10110U up to 4.10 GHz handles industrial workloads
  • 16 GB DDR4 and 512 GB SATA SSD ready for expansion to 32 GB
  • Wide 9-36 V DC input suits unstable power environments

Industrial IP65 Panel PC

The Partaker A19 is a 12.1-inch industrial all-in-one computer with an IP65-rated front panel. It runs on an Intel Core i3-10110U processor with 16GB of DDR4 memory and a 512GB SSD. The fanless aluminium chassis supports 9-36V wide-voltage input and comes with Windows 11 Pro pre-installed.

Suited for rugged environments, not consumer use

This unit fits embedded installations, machine interfaces and factory automation where dust, water jets and wide temperature ranges are present. The resistive multi-touch screen works with gloves. Buyers needing a capacitive multi-touch experience, higher screen brightness, discrete graphics performance or a different storage interface should look elsewhere.

9-36V DC Phoenix power input

The 2-pin Phoenix connector accepts 9-36V DC, allowing direct connection to industrial power systems without an external adapter. This wide-range input is the key specification for integrating the panel PC into existing control cabinets or mobile equipment.

Kohokohdat

  • IP65 front panel resists dust and water jets
  • Fanless aluminium alloy chassis runs silently 24/7
  • Intel Core i3-10110U up to 4.10 GHz handles industrial workloads
  • 16 GB DDR4 and 512 GB SATA SSD ready for expansion to 32 GB
  • Wide 9-36 V DC input suits unstable power environments

Tekniset tiedot

ModelA19-New-I3-10110U-16G512G
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeIntel Core i3 10th Gen
GPU/VGA TypeIntel UHD Graphics
Memory Capacity16GB DDR4
Maximum Memory Supported32 GB
SSD512GB
HDDNo
Screen Size12.1"
TouchscreenYes

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What external power source does the 9-36V 2-pin Phoenix connector require?

The unit accepts a DC input from 9 V to 36 V through the 2-pin Phoenix connector; the included 12 V 5 A adapter covers that range.

Can the two Intel 1000M LAN ports and the four USB 3.0 ports run simultaneously with legacy RS-232 devices on the COM ports?

Yes, the two Gigabit LAN ports, four USB 3.0 ports and two COM ports (configurable for RS232/RS422/RS485) are all independent and operate at the same time.

How do I confirm the TPM 2.0 module is active after Windows 11 Pro starts?

Open Windows Security, go to Device security, and verify that a TPM 2.0 ready status appears under Security processor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.