نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Compact 12.1 inch industrial all-in-one PC with flat IP65 front panel, aluminium fanless chassis, resistive multi-touch screen

partaker

Partaker A19 12.1" IP65 Industrial All-in-One PC i3-10110U 16GB 512GB

SKU CH-WQX6-4GEHY

A 12.1" IP65-rated industrial all-in-one PC with a resistive multi-touch screen, Intel Core i3-10110U, 16GB DDR4 and a 512GB SATA SSD, running Windows 11 Pro in a fanless aluminium chassis

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeIntel Core i3 10th Gen
  • GPU/VGA TypeIntel UHD Graphics
  • Memory Capacity16GB DDR4
  • Maximum Memory Supported32 GB

CPU Type Intel Core i3 10th Gen

Memory Capacity 16GB DDR4

SSD 512GB

  • IP65 front panel resists dust and water jets
  • Fanless aluminium alloy chassis runs silently 24/7
  • Intel Core i3-10110U up to 4.10 GHz handles industrial workloads
  • 16 GB DDR4 and 512 GB SATA SSD ready for expansion to 32 GB
  • Wide 9-36 V DC input suits unstable power environments

Industrial IP65 Panel PC

The Partaker A19 is a 12.1-inch industrial all-in-one computer with an IP65-rated front panel. It runs on an Intel Core i3-10110U processor with 16GB of DDR4 memory and a 512GB SSD. The fanless aluminium chassis supports 9-36V wide-voltage input and comes with Windows 11 Pro pre-installed.

Suited for rugged environments, not consumer use

This unit fits embedded installations, machine interfaces and factory automation where dust, water jets and wide temperature ranges are present. The resistive multi-touch screen works with gloves. Buyers needing a capacitive multi-touch experience, higher screen brightness, discrete graphics performance or a different storage interface should look elsewhere.

9-36V DC Phoenix power input

The 2-pin Phoenix connector accepts 9-36V DC, allowing direct connection to industrial power systems without an external adapter. This wide-range input is the key specification for integrating the panel PC into existing control cabinets or mobile equipment.

أبرز المميزات

  • IP65 front panel resists dust and water jets
  • Fanless aluminium alloy chassis runs silently 24/7
  • Intel Core i3-10110U up to 4.10 GHz handles industrial workloads
  • 16 GB DDR4 and 512 GB SATA SSD ready for expansion to 32 GB
  • Wide 9-36 V DC input suits unstable power environments

المواصفات

ModelA19-New-I3-10110U-16G512G
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeIntel Core i3 10th Gen
GPU/VGA TypeIntel UHD Graphics
Memory Capacity16GB DDR4
Maximum Memory Supported32 GB
SSD512GB
HDDNo
Screen Size12.1"
TouchscreenYes

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What external power source does the 9-36V 2-pin Phoenix connector require?

The unit accepts a DC input from 9 V to 36 V through the 2-pin Phoenix connector; the included 12 V 5 A adapter covers that range.

Can the two Intel 1000M LAN ports and the four USB 3.0 ports run simultaneously with legacy RS-232 devices on the COM ports?

Yes, the two Gigabit LAN ports, four USB 3.0 ports and two COM ports (configurable for RS232/RS422/RS485) are all independent and operate at the same time.

How do I confirm the TPM 2.0 module is active after Windows 11 Pro starts?

Open Windows Security, go to Device security, and verify that a TPM 2.0 ready status appears under Security processor.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.