Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Compact 12.1 inch industrial all-in-one PC with flat IP65 front panel, aluminium fanless chassis, resistive multi-touch screen

partaker

Partaker A19 12.1" IP65 Industrial All-in-One PC i3-10110U 16GB 512GB

SKU CH-WQX6-4GEHY

A 12.1" IP65-rated industrial all-in-one PC with a resistive multi-touch screen, Intel Core i3-10110U, 16GB DDR4 and a 512GB SATA SSD, running Windows 11 Pro in a fanless aluminium chassis

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeIntel Core i3 10th Gen
  • GPU/VGA TypeIntel UHD Graphics
  • Memory Capacity16GB DDR4
  • Maximum Memory Supported32 GB

CPU Type Intel Core i3 10th Gen

Memory Capacity 16GB DDR4

SSD 512GB

  • IP65 front panel resists dust and water jets
  • Fanless aluminium alloy chassis runs silently 24/7
  • Intel Core i3-10110U up to 4.10 GHz handles industrial workloads
  • 16 GB DDR4 and 512 GB SATA SSD ready for expansion to 32 GB
  • Wide 9-36 V DC input suits unstable power environments

Industrial IP65 Panel PC

The Partaker A19 is a 12.1-inch industrial all-in-one computer with an IP65-rated front panel. It runs on an Intel Core i3-10110U processor with 16GB of DDR4 memory and a 512GB SSD. The fanless aluminium chassis supports 9-36V wide-voltage input and comes with Windows 11 Pro pre-installed.

Suited for rugged environments, not consumer use

This unit fits embedded installations, machine interfaces and factory automation where dust, water jets and wide temperature ranges are present. The resistive multi-touch screen works with gloves. Buyers needing a capacitive multi-touch experience, higher screen brightness, discrete graphics performance or a different storage interface should look elsewhere.

9-36V DC Phoenix power input

The 2-pin Phoenix connector accepts 9-36V DC, allowing direct connection to industrial power systems without an external adapter. This wide-range input is the key specification for integrating the panel PC into existing control cabinets or mobile equipment.

Prednosti

  • IP65 front panel resists dust and water jets
  • Fanless aluminium alloy chassis runs silently 24/7
  • Intel Core i3-10110U up to 4.10 GHz handles industrial workloads
  • 16 GB DDR4 and 512 GB SATA SSD ready for expansion to 32 GB
  • Wide 9-36 V DC input suits unstable power environments

Špecifikácie

ModelA19-New-I3-10110U-16G512G
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeIntel Core i3 10th Gen
GPU/VGA TypeIntel UHD Graphics
Memory Capacity16GB DDR4
Maximum Memory Supported32 GB
SSD512GB
HDDNo
Screen Size12.1"
TouchscreenYes

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What external power source does the 9-36V 2-pin Phoenix connector require?

The unit accepts a DC input from 9 V to 36 V through the 2-pin Phoenix connector; the included 12 V 5 A adapter covers that range.

Can the two Intel 1000M LAN ports and the four USB 3.0 ports run simultaneously with legacy RS-232 devices on the COM ports?

Yes, the two Gigabit LAN ports, four USB 3.0 ports and two COM ports (configurable for RS232/RS422/RS485) are all independent and operate at the same time.

How do I confirm the TPM 2.0 module is active after Windows 11 Pro starts?

Open Windows Security, go to Device security, and verify that a TPM 2.0 ready status appears under Security processor.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.