Partaker A3 13.3" i5-6200U 8GB DDR4 512GB SSD 1TB HDD all-in-one PC
- All-in-One
- Windows 11 Pro
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
partaker
13.3" industrial all-in-one with IP65 front panel, i7-6500U, 8GB DDR4, 512GB SSD and 1TB HDD for 24/7 operation
CPU Type Intel Core i7 6th Gen
GPU/VGA Type Intel HD Graphics 520
The Partaker A3 is a 13.3-inch all-in-one computer built for continuous industrial use. An Intel Core i7-6500U processor and 8 GB of DDR4 memory drive Windows 11 Pro in a fanless aluminium chassis rated for 0–50 °C with the SSD installed. The IP65-protected front panel resists dust and water jets in harsh environments.
Two Gigabit LAN ports, dual COM ports, HDMI, VGA, four USB ports and audio I/O cover legacy and modern peripherals. A Mini PCIe slot with a SIM holder allows optional 4G or Wi-Fi expansion. The unit measures 334.2 × 229.85 × 52.5 mm with a 326 × 232 mm cut-out, supporting embedded, wall, desktop or cantilever mounting.
A 512 GB SSD and a 1 TB HDD are factory-fitted; the board also accepts one mSATA SSD, one M.2 2280 NVMe or SATA drive and one 2.5-inch SATA device. Maximum memory is 16 GB across two SODIMM DDR3L slots. Buyers needing more than two LAN ports or a larger display should look elsewhere.
| Model | A3-PA-133TPC-CE5A(I76)-8G512G1TB |
|---|---|
| Form Factor | All-in-One |
| Operating System | Windows 11 Pro |
| CPU Type | Intel Core i7 6th Gen |
| GPU/VGA Type | Intel HD Graphics 520 |
| Memory Capacity | 8GB DDR4 |
| SSD | 512GB |
| HDD | 1TB |
| Screen Size | 13.3" |
| Touchscreen | Yes |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 13.3" TFT LED panel has a native resolution of 1280 x 800; external displays connected via HDMI or VGA can run at their own supported resolutions.
The embedded installation requires an opening hole of 326 x 232 mm to fit the 334.2 x 229.85 x 52.5 mm chassis.
Open the rear cover, insert the mSATA card or M.2 2280 NVMe module at an angle, then secure it with the single retention screw — the step often skipped is fastening that screw before reassembly.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?