Partaker A3 13.3" i5-6200U 8GB DDR4 512GB SSD 1TB HDD all-in-one PC
- All-in-One
- Windows 11 Pro
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
partaker
13.3" industrial all-in-one with IP65 front panel, i7-6500U, 8GB DDR4, 512GB SSD and 1TB HDD for 24/7 operation
CPU Type Intel Core i7 6th Gen
GPU/VGA Type Intel HD Graphics 520
The Partaker A3 is a 13.3-inch all-in-one computer built for continuous industrial use. An Intel Core i7-6500U processor and 8 GB of DDR4 memory drive Windows 11 Pro in a fanless aluminium chassis rated for 0–50 °C with the SSD installed. The IP65-protected front panel resists dust and water jets in harsh environments.
Two Gigabit LAN ports, dual COM ports, HDMI, VGA, four USB ports and audio I/O cover legacy and modern peripherals. A Mini PCIe slot with a SIM holder allows optional 4G or Wi-Fi expansion. The unit measures 334.2 × 229.85 × 52.5 mm with a 326 × 232 mm cut-out, supporting embedded, wall, desktop or cantilever mounting.
A 512 GB SSD and a 1 TB HDD are factory-fitted; the board also accepts one mSATA SSD, one M.2 2280 NVMe or SATA drive and one 2.5-inch SATA device. Maximum memory is 16 GB across two SODIMM DDR3L slots. Buyers needing more than two LAN ports or a larger display should look elsewhere.
| Model | A3-PA-133TPC-CE5A(I76)-8G512G1TB |
|---|---|
| Form Factor | All-in-One |
| Operating System | Windows 11 Pro |
| CPU Type | Intel Core i7 6th Gen |
| GPU/VGA Type | Intel HD Graphics 520 |
| Memory Capacity | 8GB DDR4 |
| SSD | 512GB |
| HDD | 1TB |
| Screen Size | 13.3" |
| Touchscreen | Yes |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The 13.3" TFT LED panel has a native resolution of 1280 x 800; external displays connected via HDMI or VGA can run at their own supported resolutions.
The embedded installation requires an opening hole of 326 x 232 mm to fit the 334.2 x 229.85 x 52.5 mm chassis.
Open the rear cover, insert the mSATA card or M.2 2280 NVMe module at an angle, then secure it with the single retention screw — the step often skipped is fastening that screw before reassembly.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟