Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
PrimoChill 30-degree rotary elbow fitting, dark nickel brass, male and female G1/4 threads

PrimoChill

PrimoChill 30° Rotary Elbow G1/4 Male Female Dark Nickel diy cooling

SKU CH-MXJX-2PWM1

A 30-degree rotary elbow fitting redirects water-cooling tubing with male and female G1/4 threads in dark nickel coated brass

  • TypeFittings

Option Dark Nickel

Näytä 10 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Quick loop redirection with 30° angled rotary elbow
  • Rotary joint aims connection any direction within 30° range
  • Male and female G 1/4 threads fit standard fittings
  • Coated brass body resists corrosion in Dark Nickel finish
  • Trusted 20-year US brand with domestic support

30-Degree Rotary Elbow for Custom Loops

The PrimoChill 30° rotary elbow is a G1/4 male-to-female fitting machined from coated brass with a dark nickel finish. It redirects tubing runs up to 30 degrees from the mounting point while the rotary collar lets you clock the outlet to any radial position. The single-piece design adds one compact joint to a custom water-cooling loop.

For builders routing tubing around tight component

This fitting suits builders who need a shallow, fixed-angle bend with rotational alignment freedom. It does not suit loops that require a sharper fixed angle, a straight bulkhead pass-through, or a continuously rotating union. It also does not suit systems using thread sizes other than G1/4.

30-degree fixed bend angle

The defining specification is the 30-degree offset between the male and female ports. This angle is not adjustable; the fitting only rotates around its axis to orient that fixed bend. Verify that your tubing path can accommodate this exact deflection before purchase.

Kohokohdat

  • Quick loop redirection with 30° angled rotary elbow
  • Rotary joint aims connection any direction within 30° range
  • Male and female G 1/4 threads fit standard fittings
  • Coated brass body resists corrosion in Dark Nickel finish
  • Trusted 20-year US brand with domestic support

Tekniset tiedot

TypeFittings

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the box include any tubing or clamps, or is it just the single rotary elbow fitting?

The package contains one Male to Female G 1/4 30 Degree Rotary Elbow Fitting in Dark Nickel; tubing and clamps are sold separately.

Should I pick this 30-degree elbow or a different angle for a tight turn near my GPU block?

This fitting provides a fixed 30-degree offset with full rotational adjustment; select a different angle only if your layout requires a sharper or shallower bend.

What does the G 1/4 thread mean when I install this in my custom loop?

Both ends use standard G 1/4 threads, so the male side screws into any G 1/4 port and the female side accepts any G 1/4 compression or barb fitting.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.