Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
PrimoChill 30-degree rotary elbow fitting, dark nickel brass, male and female G1/4 threads

PrimoChill

PrimoChill 30° Rotary Elbow G1/4 Male Female Dark Nickel diy cooling

SKU CH-MXJX-2PWM1

A 30-degree rotary elbow fitting redirects water-cooling tubing with male and female G1/4 threads in dark nickel coated brass

  • TypeFittings

Option Dark Nickel

Zobrazit dalších 10 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Quick loop redirection with 30° angled rotary elbow
  • Rotary joint aims connection any direction within 30° range
  • Male and female G 1/4 threads fit standard fittings
  • Coated brass body resists corrosion in Dark Nickel finish
  • Trusted 20-year US brand with domestic support

30-Degree Rotary Elbow for Custom Loops

The PrimoChill 30° rotary elbow is a G1/4 male-to-female fitting machined from coated brass with a dark nickel finish. It redirects tubing runs up to 30 degrees from the mounting point while the rotary collar lets you clock the outlet to any radial position. The single-piece design adds one compact joint to a custom water-cooling loop.

For builders routing tubing around tight component

This fitting suits builders who need a shallow, fixed-angle bend with rotational alignment freedom. It does not suit loops that require a sharper fixed angle, a straight bulkhead pass-through, or a continuously rotating union. It also does not suit systems using thread sizes other than G1/4.

30-degree fixed bend angle

The defining specification is the 30-degree offset between the male and female ports. This angle is not adjustable; the fitting only rotates around its axis to orient that fixed bend. Verify that your tubing path can accommodate this exact deflection before purchase.

Přednosti

  • Quick loop redirection with 30° angled rotary elbow
  • Rotary joint aims connection any direction within 30° range
  • Male and female G 1/4 threads fit standard fittings
  • Coated brass body resists corrosion in Dark Nickel finish
  • Trusted 20-year US brand with domestic support

Specifikace

TypeFittings

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the box include any tubing or clamps, or is it just the single rotary elbow fitting?

The package contains one Male to Female G 1/4 30 Degree Rotary Elbow Fitting in Dark Nickel; tubing and clamps are sold separately.

Should I pick this 30-degree elbow or a different angle for a tight turn near my GPU block?

This fitting provides a fixed 30-degree offset with full rotational adjustment; select a different angle only if your layout requires a sharper or shallower bend.

What does the G 1/4 thread mean when I install this in my custom loop?

Both ends use standard G 1/4 threads, so the male side screws into any G 1/4 port and the female side accepts any G 1/4 compression or barb fitting.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.