Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact rectangular plastic DIN-rail power supply, light grey finish, LED status indicator, screw terminals visible

PULS Power

PULS Power ML Series 10-12VDC 30W DIN Rail Power Supply

SKU CH-2BDY-5ZBB5

DIN-rail switching supply delivers 10-12 VDC at 30 W from 100-240 VAC input

  • TypeATX
  • Wide 100-240 VAC input works worldwide
  • Compact 45 mm DIN-rail width saves cabinet space
  • 30 W at 10-12 VDC delivers 3.0 A for control circuits
  • 10 °C to 70 °C range suits harsh environments
  • cULus, cRUus, Class I Div 2, CE, RoHS, NEC Class 2 compliance

ML Series 30 W DIN Rail Supply

This PULS Power ML Series unit is a compact DIN rail power supply that converts 100 to 240 VAC input into a 10 to 12 VDC output rated at 30 W. It mounts on standard DIN rail inside a plastic enclosure measuring 75 mm high, 45 mm wide and 91 mm deep. A status LED provides visual confirmation of operation. The supply meets cUL, cRU, Class I Division 2, CE, RoHS and NEC Class 2 standards.

Suited for low-power control cabinets

The 3 A output suits panels powering sensors, small PLCs or relay coils where space is limited and a wide AC input range is required. The operating range of -10 to 70 °C covers unheated enclosures. Builders who need more than 30 W, higher output voltage or redundant inputs should look at larger units. Applications requiring IP-rated protection beyond IP20 also need a different enclosure.

30 W at 10-12 VDC decides fit

The single figure that determines compatibility is the 30 W continuous rating at 10 to 12 VDC. If the connected load draws more than 3 A the supply will not sustain operation. Verify the total wattage of every device on the rail before specifying this model.

Kohokohdat

  • Wide 100-240 VAC input works worldwide
  • Compact 45 mm DIN-rail width saves cabinet space
  • 30 W at 10-12 VDC delivers 3.0 A for control circuits
  • 10 °C to 70 °C range suits harsh environments
  • cULus, cRUus, Class I Div 2, CE, RoHS, NEC Class 2 compliance

Tekniset tiedot

TypeATX

Kysymyksiä tästä tuotteesta

Will the electrolytic capacitors inside the 30 W ML Series unit need scheduled replacement?

The supply is rated for long lifetime at up to 70 °C ambient; no user-serviceable capacitor replacement interval is published.

What limits continuous output when the supply runs at 3.0 A on a DIN rail?

The 30 W rating and convection-cooled plastic case mean thermal dissipation is the first constraint under sustained full load.

How much heat and noise does the ML Series produce when powering a 12 V load all day?

Silent convection cooling with no fan; the plastic enclosure reaches a temperature determined by the 30 W loss and 75 × 45 × 91 mm footprint.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.