Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Compact rectangular plastic DIN-rail power supply, light grey finish, LED status indicator, screw terminals visible

PULS Power

PULS Power ML Series 10-12VDC 30W DIN Rail Power Supply

SKU CH-2BDY-5ZBB5

DIN-rail switching supply delivers 10-12 VDC at 30 W from 100-240 VAC input

  • TypeATX
  • Wide 100-240 VAC input works worldwide
  • Compact 45 mm DIN-rail width saves cabinet space
  • 30 W at 10-12 VDC delivers 3.0 A for control circuits
  • 10 °C to 70 °C range suits harsh environments
  • cULus, cRUus, Class I Div 2, CE, RoHS, NEC Class 2 compliance

ML Series 30 W DIN Rail Supply

This PULS Power ML Series unit is a compact DIN rail power supply that converts 100 to 240 VAC input into a 10 to 12 VDC output rated at 30 W. It mounts on standard DIN rail inside a plastic enclosure measuring 75 mm high, 45 mm wide and 91 mm deep. A status LED provides visual confirmation of operation. The supply meets cUL, cRU, Class I Division 2, CE, RoHS and NEC Class 2 standards.

Suited for low-power control cabinets

The 3 A output suits panels powering sensors, small PLCs or relay coils where space is limited and a wide AC input range is required. The operating range of -10 to 70 °C covers unheated enclosures. Builders who need more than 30 W, higher output voltage or redundant inputs should look at larger units. Applications requiring IP-rated protection beyond IP20 also need a different enclosure.

30 W at 10-12 VDC decides fit

The single figure that determines compatibility is the 30 W continuous rating at 10 to 12 VDC. If the connected load draws more than 3 A the supply will not sustain operation. Verify the total wattage of every device on the rail before specifying this model.

Pluspunten

  • Wide 100-240 VAC input works worldwide
  • Compact 45 mm DIN-rail width saves cabinet space
  • 30 W at 10-12 VDC delivers 3.0 A for control circuits
  • 10 °C to 70 °C range suits harsh environments
  • cULus, cRUus, Class I Div 2, CE, RoHS, NEC Class 2 compliance

Specificaties

TypeATX

Vragen over dit artikel

Will the electrolytic capacitors inside the 30 W ML Series unit need scheduled replacement?

The supply is rated for long lifetime at up to 70 °C ambient; no user-serviceable capacitor replacement interval is published.

What limits continuous output when the supply runs at 3.0 A on a DIN rail?

The 30 W rating and convection-cooled plastic case mean thermal dissipation is the first constraint under sustained full load.

How much heat and noise does the ML Series produce when powering a 12 V load all day?

Silent convection cooling with no fan; the plastic enclosure reaches a temperature determined by the 30 W loss and 75 × 45 × 91 mm footprint.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.