PULS Power ML Series 10-12VDC 30W DIN Rail Power Supply

ML Series 30 W DIN Rail Supply

This PULS Power ML Series unit is a compact DIN rail power supply that converts 100 to 240 VAC input into a 10 to 12 VDC output rated at 30 W. It mounts on standard DIN rail inside a plastic enclosure measuring 75 mm high, 45 mm wide and 91 mm deep. A status LED provides visual confirmation of operation. The supply meets cUL, cRU, Class I Division 2, CE, RoHS and NEC Class 2 standards.

Suited for low-power control cabinets

The 3 A output suits panels powering sensors, small PLCs or relay coils where space is limited and a wide AC input range is required. The operating range of -10 to 70 °C covers unheated enclosures. Builders who need more than 30 W, higher output voltage or redundant inputs should look at larger units. Applications requiring IP-rated protection beyond IP20 also need a different enclosure.

30 W at 10-12 VDC decides fit

The single figure that determines compatibility is the 30 W continuous rating at 10 to 12 VDC. If the connected load draws more than 3 A the supply will not sustain operation. Verify the total wattage of every device on the rail before specifying this model.