Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 server memory module with black chips

SAMSUNG

SAMSUNG M393B1G70Bh0-Yk0 8GB DDR3 Server RAM

SKU CH-521M-CSCDC

8GB DDR3 registered ECC server memory module running at 1.35V with CL11 latency

  • Capacity8GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 SDRAM
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCECC
  • ECC registered design prevents data corruption in critical workloads
  • Low 1.35V operation reduces server power draw and heat
  • Single-rank 1Rx4 layout simplifies memory population rules
  • 240-pin DDR3 form factor fits standard registered DIMM slots
  • CL11 latency delivers responsive performance for enterprise applications

Server-grade DDR3 module

This 8 GB registered DIMM uses 240-pin DDR3 SDRAM with ECC and a CL11 latency profile. It is built for servers and workstations that require error correction and signal buffering. The 1.35 V operating voltage helps reduce power draw in dense memory configurations. Systems without registered-memory support cannot use this module.

ECC and registered operation

On-board error-correcting code detects and corrects single-bit errors to protect data integrity. Registered buffering lightens the electrical load on the memory controller, allowing larger total capacities per channel. The 1Rx4 rank organisation suits platforms qualified for single-rank registered DIMMs. No additional software or accessories are included to alter this behaviour.

240-pin form factor and low voltage

The standard 240-pin layout fits DDR3 registered DIMM sockets in qualified server boards. Gold-edge contacts resist oxidation in continuously powered environments. Major-brand DRAM chips are used throughout for consistent yield. The 1.35 V specification matches low-voltage DDR3 server platforms; boards locked to 1.5 V will not post with this module.

Kohokohdat

  • ECC registered design prevents data corruption in critical workloads
  • Low 1.35V operation reduces server power draw and heat
  • Single-rank 1Rx4 layout simplifies memory population rules
  • 240-pin DDR3 form factor fits standard registered DIMM slots
  • CL11 latency delivers responsive performance for enterprise applications

Tekniset tiedot

BrandSAMSUNG
ModelM393B1G70Bh0-Yk0
Capacity8GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 SDRAM
CAS LatencyCL11
Voltage1.35V
ECCECC
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

Does the registered ECC design reduce long-term maintenance compared to unbuffered modules?

Registered ECC modules add a register that lessens electrical load on the memory controller, which can improve signal integrity and reduce correctable error counts over time.

What limits sustained throughput first — CAS latency or the DDR3 bus width?

The CL11 latency and 240-pin DDR3 interface set the timing ceiling; sustained throughput is bounded by the bus clock rather than the CAS figure alone.

How does 1.35 V affect heat output during continuous server operation?

Operating at 1.35 V lowers power draw per module versus standard 1.5 V DDR3, reducing thermal load inside a fully populated chassis.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.