Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5-inch enterprise hard drive in HP Gen11 tray

Seagate

Seagate P44757-005 Generation 11 18TB 7200 RPM SATA 6.0Gb/s 256MB 3.5in internal hard drive

SKU CH-2T4W-83Y4G MPN P44757-005

An 18TB 7200 RPM SATA enterprise drive with helium sealing, 256MB cache and 270 MB/s sustained transfer for 24/7 workloads

  • Capacity18TB
  • RPM7200 RPM
  • InterfaceSATA 6.0Gb/s
  • Cache256MB
  • Recording TechnologyCMR
  • Form Factor3.5"
  • 18TB capacity stores massive datasets
  • 7200 RPM spindle delivers sustained 270 MB/s throughput
  • Helium-sealed CMR design built for 24/7 enterprise workloads
  • 256MB cache accelerates random read and write operations
  • Hot-swap support in 3.5in tray fits Gen11 ProLiant servers

18 TB Enterprise Hard Drive for Servers

The Seagate Generation 11 drive delivers 18 TB of storage on a 3.5 inch SATA 6.0 Gb/s interface. It spins at 7200 RPM with a 256 MB cache and uses CMR recording technology. The helium-sealed design is rated for 24/7 operation in enterprise NAS, DAS, workstation and data centre environments.

Helium-Sealed Build with Hot-Swap Tray

A helium-sealed enclosure reduces internal friction and supports continuous duty cycles. The drive ships installed in an HP Gen11 3.5 inch tray that fits Gen10+ and Gen11 ProLiant servers, enabling hot-swap replacement without powering down the chassis. SATA connectors follow the standard 6.0 Gb/s pin-out for direct backplane attachment.

Verify SATA Backplane and Tray Clearance

Confirm that your server or storage array accepts 3.5 inch SATA drives and provides a compatible Gen10+ or Gen11 hot-swap bay. The included tray is required for proper alignment in listed ProLiant DL and ML models. Systems without a matching backplane or tray will not support this drive.

Kohokohdat

  • 18TB capacity stores massive datasets
  • 7200 RPM spindle delivers sustained 270 MB/s throughput
  • Helium-sealed CMR design built for 24/7 enterprise workloads
  • 256MB cache accelerates random read and write operations
  • Hot-swap support in 3.5in tray fits Gen11 ProLiant servers

Tekniset tiedot

BrandSeagate/HP
SeriesGeneration 11
ModelMB018000GYDKR
Part NumberP44757-005
Capacity18TB
RPM7200 RPM
InterfaceSATA 6.0Gb/s
Cache256MB
Recording TechnologyCMR
Form Factor3.5"
FeaturesEnterprise-Class, 24/7 Rated, Helium-Sealed, Hot-Swap Support

Kysymyksiä tästä tuotteesta

What real-world throughput does the SATA 6.0 Gb/s interface deliver on this 18 TB drive?

The SATA 6.0 Gb/s link supports a sustained data transfer rate up to 270 MB/s on this 18 TB model.

Does the 3.5-inch form factor require a specific tray for HP Gen11 servers?

It ships pre-installed in a 3.5-inch HP Gen11 tray that also fits Gen10+ and Gen11 ProLiant servers.

How is the drive installed in a hot-swap bay and what step is often missed?

Slide the tray into the bay until the latch clicks; the step often missed is fully seating the latch to engage the hot-swap connector.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.