Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch bare hard drive with exposed circuit board

Seagate

Seagate ST3120026AS 120GB 7200 RPM 8MB SATA 1.5Gb/s 3.5" internal hard drive

SKU CH-0Z8J-3QJB5 MPN ST3120026AS

A 120 GB desktop hard drive spinning at 7200 RPM with 8 MB cache on a SATA 1.5Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 1.5Gb/s
  • Capacity120GB
  • RPM7200 RPM
  • Cache8MB
  • Average Seek Time8.5ms
  • 7200 RPM spindle speed accelerates data access
  • 8 MB cache buffer smooths burst transfers
  • SATA 1.5Gb/s interface connects to desktop motherboards
  • 120 GB capacity stores operating system and applications
  • 350 Gs non‑operating shock rating protects stored data

Capacity and use-case

This 120 GB desktop hard drive suits basic storage needs such as legacy operating systems, small application sets or secondary data volumes. Its 7200 RPM spindle and 8 MB cache deliver standard mechanical performance for everyday tasks. The SATA 1.5 Gb/s interface matches older motherboards and controllers that do not support faster SATA revisions. Buyers who need more capacity or modern transfer speeds should consider other options.

Build and connectors

The bare 3.5 inch drive measures 1.0 inch high and uses the 350 Gs non-operating shock rating together with a 3D Defense System for physical resilience. A standard SATA data and power connector pair provides simple installation in any compatible bay or caddy. The 8.5 ms average seek time and 4.16 ms latency reflect typical mechanical behaviour for this class of drive.

Compatibility check

Verify that the host system provides a free SATA port operating at 1.5 Gb/s and a 3.5 inch drive bay with the correct mounting holes. Ensure the power supply includes a SATA power lead or an adapter for the drive’s connector. Confirm the BIOS or operating system can recognise a 120 GB volume without additional drivers or updates.

Kohokohdat

  • 7200 RPM spindle speed accelerates data access
  • 8 MB cache buffer smooths burst transfers
  • SATA 1.5Gb/s interface connects to desktop motherboards
  • 120 GB capacity stores operating system and applications
  • 350 Gs non‑operating shock rating protects stored data

Tekniset tiedot

BrandSeagate
SeriesBarraCuda 7200.7
ModelST3120026AS
PackagingBare Drive
InterfaceSATA 1.5Gb/s
Capacity120GB
RPM7200 RPM
Cache8MB
Average Seek Time8.5ms
Average Latency4.16ms
Features350 Gs non-op shock
3D Defense System
Form Factor3.5"
Lähetyspaino0.57 kg
Pakkauksen mitat146 × 102 × 25 mm

Kysymyksiä tästä tuotteesta

What practical throughput does the SATA 1.5Gb/s interface cap this drive at?

The SATA 1.5Gb/s interface limits maximum transfer to 1.5 Gb/s, so real-world throughput will not exceed that ceiling.

What physical clearance and bay size does the 3.5" 1.0 inch low-profile form factor require?

It fits a standard 3.5" drive bay and needs 1.0 inch of vertical clearance for the low-profile height.

How is the bare drive installed, and which jumper step is often missed?

Mount it in a 3.5" bay, connect SATA data and power cables, and ensure no legacy master/slave jumper is set because SATA drives do not use them.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.