SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Seagate
A 120 GB desktop hard drive spinning at 7200 RPM with 8 MB cache on a SATA 1.5Gb/s interface
This 120 GB desktop hard drive suits basic storage needs such as legacy operating systems, small application sets or secondary data volumes. Its 7200 RPM spindle and 8 MB cache deliver standard mechanical performance for everyday tasks. The SATA 1.5 Gb/s interface matches older motherboards and controllers that do not support faster SATA revisions. Buyers who need more capacity or modern transfer speeds should consider other options.
The bare 3.5 inch drive measures 1.0 inch high and uses the 350 Gs non-operating shock rating together with a 3D Defense System for physical resilience. A standard SATA data and power connector pair provides simple installation in any compatible bay or caddy. The 8.5 ms average seek time and 4.16 ms latency reflect typical mechanical behaviour for this class of drive.
Verify that the host system provides a free SATA port operating at 1.5 Gb/s and a 3.5 inch drive bay with the correct mounting holes. Ensure the power supply includes a SATA power lead or an adapter for the drive’s connector. Confirm the BIOS or operating system can recognise a 120 GB volume without additional drivers or updates.
| Brand | Seagate |
|---|---|
| Series | BarraCuda 7200.7 |
| Model | ST3120026AS |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 120GB |
| RPM | 7200 RPM |
| Cache | 8MB |
| Average Seek Time | 8.5ms |
| Average Latency | 4.16ms |
| Features | 350 Gs non-op shock 3D Defense System |
| Form Factor | 3.5" |
| وزن الشحنة | 0.57 kg |
| أبعاد الطرد | 146 × 102 × 25 mm |
The SATA 1.5Gb/s interface limits maximum transfer to 1.5 Gb/s, so real-world throughput will not exceed that ceiling.
It fits a standard 3.5" drive bay and needs 1.0 inch of vertical clearance for the low-profile height.
Mount it in a 3.5" bay, connect SATA data and power cables, and ensure no legacy master/slave jumper is set because SATA drives do not use them.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟