Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5-inch bare enterprise hard drive with exposed circuit board

Seagate

Seagate ST6000NM0105 6TB 7200 RPM SAS 12Gb/s 256MB 3.5" internal hard drive

SKU CH-7T9Y-WZ8M9 MPN ST6000NM0105

A 6 TB enterprise hard drive with 7200 RPM, 256 MB cache and 12 Gb/s SAS interface for 24×7 bulk-data workloads

  • PackagingBare Drive
  • Interface4Kn SAS
  • Capacity6TB
  • RPM7200 RPM
  • Cache256MB
  • Average Latency4.16ms

Options 6TB

  • 6TB capacity stores vast unstructured datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 12Gb/s SAS interface enables high-speed host connectivity
  • 256MB cache buffers bursts for smoother I/O
  • Engineered for 24x7 operation at 550TB per year

Enterprise 6 TB SAS drive for bulk storage

The Seagate ST6000NM0105 is a 6 TB 3.5-inch internal hard drive built for enterprise capacity tiers. It spins at 7 200 RPM with a 256 MB cache and uses conventional magnetic recording technology. The drive connects through a 12 Gb/s SAS interface that also supports SATA 6 Gb/s operation. It is engineered for continuous 24x7 workloads in replicated and RAID multi-drive storage servers.

Check SAS controller and 4Kn sector support

Before ordering, verify that your host bus adapter or RAID controller presents a 12 Gb/s SAS port and can address 4Kn logical sectors. The drive requires a SAS backplane or cabling that carries the dual-port SAS protocol; a SATA-only backplane will not negotiate the link. Confirm the server chassis accepts a 26.10 mm high 3.5-inch form factor and that firmware supports the advanced write caching algorithms.

Thermals and power in 24x7 operation

The drive is rated for a 550 TB per year workload, ten times typical desktop ratings, and uses dual processors with a top-cover-attached motor to maintain consistent throughput in dense arrays. A humidity sensor and ramp-load technology protect the heads during vibration and temperature shifts. Average latency is 4.16 ms. Power draw varies with seek activity but remains within standard enterprise 3.5-inch limits for the given form factor.

Kohokohdat

  • 6TB capacity stores vast unstructured datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 12Gb/s SAS interface enables high-speed host connectivity
  • 256MB cache buffers bursts for smoother I/O
  • Engineered for 24x7 operation at 550TB per year

Tekniset tiedot

BrandSeagate
ModelST6000NM0105
PackagingBare Drive
Interface4Kn SAS
Capacity6TB
RPM7200 RPM
Cache256MB
Average Latency4.16ms
FeaturesCapacity-Optimized Enterprise Hard Drive for Bulk-Data Applications
- 1TB to 8TB*1, 3.5-inch enterprise drive with industry-leading conventional magnetic recording (CMR) technology
- Advanced Write Caching feature enables up to 100% performance improvement in random writes over last-generation drive
- 12Gb/s SAS and SATA 6Gb/s interfaces in industry-standard formats (512n, 512e and 4Kn) for easy integration into replicated and RAID multi-drive storage servers and systems
- State-of-the-art cache, on-the-fly error-correction algorithms, super parity and end-to-end SAS-based data integ
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
Lähetyspaino0.71 kg
Pakkauksen mitat155 × 124 × 3 mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the bare-drive package include mounting rails or a SAS cable, or must I buy those separately?

The drive ships as a bare 3.5-inch unit only; rails, cables and any carrier trays are not included and must be sourced separately.

Should I choose the 4Kn SAS model or a 512e version for a RAID array that expects 4Kn sectors?

Select this 4Kn SAS variant when the controller and RAID firmware require native 4Kn sector addressing; a 512e model would present emulated 512-byte sectors instead.

What does the 12 Gb/s SAS interface deliver in a live server backplane?

The 12 Gb/s SAS link provides full-duplex bandwidth to the backplane, supporting the 7200 RPM mechanism and 256 MB cache for sustained enterprise workloads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.