Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Silver 3.5-inch bare enterprise hard drive with exposed circuit board

Seagate

Seagate ST6000NM0105 6TB 7200 RPM SAS 12Gb/s 256MB 3.5" internal hard drive

SKU CH-7T9Y-WZ8M9 MPN ST6000NM0105

A 6 TB enterprise hard drive with 7200 RPM, 256 MB cache and 12 Gb/s SAS interface for 24×7 bulk-data workloads

  • PackagingBare Drive
  • Interface4Kn SAS
  • Capacity6TB
  • RPM7200 RPM
  • Cache256MB
  • Average Latency4.16ms

Options 6TB

  • 6TB capacity stores vast unstructured datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 12Gb/s SAS interface enables high-speed host connectivity
  • 256MB cache buffers bursts for smoother I/O
  • Engineered for 24x7 operation at 550TB per year

Enterprise 6 TB SAS drive for bulk storage

The Seagate ST6000NM0105 is a 6 TB 3.5-inch internal hard drive built for enterprise capacity tiers. It spins at 7 200 RPM with a 256 MB cache and uses conventional magnetic recording technology. The drive connects through a 12 Gb/s SAS interface that also supports SATA 6 Gb/s operation. It is engineered for continuous 24x7 workloads in replicated and RAID multi-drive storage servers.

Check SAS controller and 4Kn sector support

Before ordering, verify that your host bus adapter or RAID controller presents a 12 Gb/s SAS port and can address 4Kn logical sectors. The drive requires a SAS backplane or cabling that carries the dual-port SAS protocol; a SATA-only backplane will not negotiate the link. Confirm the server chassis accepts a 26.10 mm high 3.5-inch form factor and that firmware supports the advanced write caching algorithms.

Thermals and power in 24x7 operation

The drive is rated for a 550 TB per year workload, ten times typical desktop ratings, and uses dual processors with a top-cover-attached motor to maintain consistent throughput in dense arrays. A humidity sensor and ramp-load technology protect the heads during vibration and temperature shifts. Average latency is 4.16 ms. Power draw varies with seek activity but remains within standard enterprise 3.5-inch limits for the given form factor.

Punti di forza

  • 6TB capacity stores vast unstructured datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 12Gb/s SAS interface enables high-speed host connectivity
  • 256MB cache buffers bursts for smoother I/O
  • Engineered for 24x7 operation at 550TB per year

Caratteristiche tecniche

BrandSeagate
ModelST6000NM0105
PackagingBare Drive
Interface4Kn SAS
Capacity6TB
RPM7200 RPM
Cache256MB
Average Latency4.16ms
FeaturesCapacity-Optimized Enterprise Hard Drive for Bulk-Data Applications
- 1TB to 8TB*1, 3.5-inch enterprise drive with industry-leading conventional magnetic recording (CMR) technology
- Advanced Write Caching feature enables up to 100% performance improvement in random writes over last-generation drive
- 12Gb/s SAS and SATA 6Gb/s interfaces in industry-standard formats (512n, 512e and 4Kn) for easy integration into replicated and RAID multi-drive storage servers and systems
- State-of-the-art cache, on-the-fly error-correction algorithms, super parity and end-to-end SAS-based data integ
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
Peso di spedizione0.71 kg
Dimensioni del pacco155 × 124 × 3 mm

Altre versioni di questo modello

altri 2 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Does the bare-drive package include mounting rails or a SAS cable, or must I buy those separately?

The drive ships as a bare 3.5-inch unit only; rails, cables and any carrier trays are not included and must be sourced separately.

Should I choose the 4Kn SAS model or a 512e version for a RAID array that expects 4Kn sectors?

Select this 4Kn SAS variant when the controller and RAID firmware require native 4Kn sector addressing; a 512e model would present emulated 512-byte sectors instead.

What does the 12 Gb/s SAS interface deliver in a live server backplane?

The 12 Gb/s SAS link provides full-duplex bandwidth to the backplane, supporting the 7200 RPM mechanism and 256 MB cache for sustained enterprise workloads.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.