Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four black low-profile DIMMs with heatspreaders, 240-pin DDR3 desktop memory kit

Simmtec, Inc

Simmtec, Inc 32GB (4x8GB) DDR3 1600MHz PC3-12800 CL10 Desktop RAM

SKU CH-HG1D-44THF

A 32GB kit of four 8GB DDR3 modules running at 1600MHz with CL10 timings and low-profile heatspreaders for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • 32 GB total capacity from four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL10 latency with 10-10-10-27 timings
  • 5 V unbuffered non-ECC operation
  • 240-pin DIMM with low-profile black heatspreaders

32GB DDR3 1600 Kit for Intel and FM1 Systems

This kit provides 32GB of DDR3 memory across four 8GB modules running at 1600MHz with PC3-12800 bandwidth. It uses 240-pin DIMMs fitted with black low-profile heatspreaders and operates at 1.5V with CL10 10-10-10-27 timings. The modules are XMP ready and tested before shipping for stability.

Suits LGA 1155 1156 2011 and AMD FM1 builds

Builders upgrading or repairing systems based on LGA 1155, LGA 1156, LGA 2011 or AMD FM1 platforms can use this kit in dual or quad-channel configurations. It is not compatible with some AM3 processor boards and does not work with any AM3+ processors, so owners of those platforms should look at other memory.

Check DDR3 240-pin support and voltage

Verify that your motherboard accepts DDR3 240-pin unbuffered non-ECC DIMMs at 1.5V and can run 1600MHz speeds with the stated timings. Confirm the board has four slots for the full quad-channel population or at least two slots for dual-channel operation. Ensure the CPU memory controller supports the rated frequency.

Kohokohdat

  • 32 GB total capacity from four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL10 latency with 10-10-10-27 timings
  • 5 V unbuffered non-ECC operation
  • 240-pin DIMM with low-profile black heatspreaders

Tekniset tiedot

Capacity32GB (4 x 8GB)
SpeedDDR3 1600 (PC3 12800)

Kysymyksiä tästä tuotteesta

What motherboard socket and voltage does this 1.5 V DDR3 kit require?

The modules run at 1.5 V and are designed for Intel LGA 1155, LGA 1156, LGA 2011 and AMD FM1 platforms.

Can I add these 240-pin DIMMs to a board that already has slower DDR3 installed?

Yes, the kit will down-clock to match the existing modules while keeping 10-10-10-27 timings at the lower speed.

How do I confirm the 1600 MHz data rate and XMP profile are active after installation?

Enter the BIOS or use a tool like CPU-Z to verify the memory runs at 1600 MHz with the 10-10-10-27 timing set.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.