Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four black low-profile DIMMs with heatspreaders, 240-pin DDR3 desktop memory kit

Simmtec, Inc

Simmtec, Inc 32GB (4x8GB) DDR3 1600MHz PC3-12800 CL10 Desktop RAM

SKU CH-HG1D-44THF

A 32GB kit of four 8GB DDR3 modules running at 1600MHz with CL10 timings and low-profile heatspreaders for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • 32 GB total capacity from four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL10 latency with 10-10-10-27 timings
  • 5 V unbuffered non-ECC operation
  • 240-pin DIMM with low-profile black heatspreaders

32GB DDR3 1600 Kit for Intel and FM1 Systems

This kit provides 32GB of DDR3 memory across four 8GB modules running at 1600MHz with PC3-12800 bandwidth. It uses 240-pin DIMMs fitted with black low-profile heatspreaders and operates at 1.5V with CL10 10-10-10-27 timings. The modules are XMP ready and tested before shipping for stability.

Suits LGA 1155 1156 2011 and AMD FM1 builds

Builders upgrading or repairing systems based on LGA 1155, LGA 1156, LGA 2011 or AMD FM1 platforms can use this kit in dual or quad-channel configurations. It is not compatible with some AM3 processor boards and does not work with any AM3+ processors, so owners of those platforms should look at other memory.

Check DDR3 240-pin support and voltage

Verify that your motherboard accepts DDR3 240-pin unbuffered non-ECC DIMMs at 1.5V and can run 1600MHz speeds with the stated timings. Confirm the board has four slots for the full quad-channel population or at least two slots for dual-channel operation. Ensure the CPU memory controller supports the rated frequency.

Přednosti

  • 32 GB total capacity from four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL10 latency with 10-10-10-27 timings
  • 5 V unbuffered non-ECC operation
  • 240-pin DIMM with low-profile black heatspreaders

Specifikace

Capacity32GB (4 x 8GB)
SpeedDDR3 1600 (PC3 12800)

Otázky k tomuto produktu

What motherboard socket and voltage does this 1.5 V DDR3 kit require?

The modules run at 1.5 V and are designed for Intel LGA 1155, LGA 1156, LGA 2011 and AMD FM1 platforms.

Can I add these 240-pin DIMMs to a board that already has slower DDR3 installed?

Yes, the kit will down-clock to match the existing modules while keeping 10-10-10-27 timings at the lower speed.

How do I confirm the 1600 MHz data rate and XMP profile are active after installation?

Enter the BIOS or use a tool like CPU-Z to verify the memory runs at 1600 MHz with the 10-10-10-27 timing set.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.