暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Simmtec, Inc

Simmtec, Inc 32GB (4x8GB) DDR3 1600MHz PC3-12800 CL10 Desktop RAM

SKU CH-HG1D-44THF

A 32GB kit of four 8GB DDR3 modules running at 1600MHz with CL10 timings and low-profile heatspreaders for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • 32 GB total capacity from four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL10 latency with 10-10-10-27 timings
  • 5 V unbuffered non-ECC operation
  • 240-pin DIMM with low-profile black heatspreaders

32GB DDR3 1600 Kit for Intel and FM1 Systems

This kit provides 32GB of DDR3 memory across four 8GB modules running at 1600MHz with PC3-12800 bandwidth. It uses 240-pin DIMMs fitted with black low-profile heatspreaders and operates at 1.5V with CL10 10-10-10-27 timings. The modules are XMP ready and tested before shipping for stability.

Suits LGA 1155 1156 2011 and AMD FM1 builds

Builders upgrading or repairing systems based on LGA 1155, LGA 1156, LGA 2011 or AMD FM1 platforms can use this kit in dual or quad-channel configurations. It is not compatible with some AM3 processor boards and does not work with any AM3+ processors, so owners of those platforms should look at other memory.

Check DDR3 240-pin support and voltage

Verify that your motherboard accepts DDR3 240-pin unbuffered non-ECC DIMMs at 1.5V and can run 1600MHz speeds with the stated timings. Confirm the board has four slots for the full quad-channel population or at least two slots for dual-channel operation. Ensure the CPU memory controller supports the rated frequency.

特長

  • 32 GB total capacity from four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL10 latency with 10-10-10-27 timings
  • 5 V unbuffered non-ECC operation
  • 240-pin DIMM with low-profile black heatspreaders

仕様

Capacity32GB (4 x 8GB)
SpeedDDR3 1600 (PC3 12800)

この商品に関する質問

What motherboard socket and voltage does this 1.5 V DDR3 kit require?

The modules run at 1.5 V and are designed for Intel LGA 1155, LGA 1156, LGA 2011 and AMD FM1 platforms.

Can I add these 240-pin DIMMs to a board that already has slower DDR3 installed?

Yes, the kit will down-clock to match the existing modules while keeping 10-10-10-27 timings at the lower speed.

How do I confirm the 1600 MHz data rate and XMP profile are active after installation?

Enter the BIOS or use a tool like CPU-Z to verify the memory runs at 1600 MHz with the 10-10-10-27 timing set.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。