Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Gray aluminum M.2 SSD enclosure with tool-free sliding cover, USB-C and USB-A cables included

Sokiwi SKUD0501-US M.2 NVMe SATA Hard Drive Adapter

SKU CH-XTBM-FPAKW

Tool-free M.2 NVMe and SATA SSD enclosure with USB 3.2 Gen 2 10 Gbps speed, aluminum heat dissipation, and included Type-C and Type-A cables

  • ColorGray
  • Dimensions3.7 in x 1.5 in x 0.4 in
  • Weight0.109 kilograms
  • Tool-free installation swaps M.2 SSDs in seconds
  • RTL9210B chipset delivers 10 Gbps NVMe and 6 Gbps SATA speeds
  • Aluminium shell dissipates heat and triggers thermal protection to protect the drive
  • Supports M.2 2230, 2242, 2260 and 2280 NVMe or SATA SSDs
  • Works with Windows, macOS, Linux and Android via USB-C or USB-A cables

What the adapter does

The Sokiwi SKUD0501-US connects an M.2 NVMe or SATA SSD to a host computer over USB. It accepts M-key and B+M key drives in 2230, 2242, 2260 and 2280 lengths, making it useful for technicians who need to read, clone or repurpose bare modules without installing them internally. The enclosure is powered entirely from the USB bus, so no external supply is required.

Build and daily use

An aluminium alloy shell acts as a heatsink for the RTL9210B controller, and the enclosure automatically throttles or pauses transfers if the drive overheats, returning to normal operation once the SSD cools. A tool-free sliding cover lets you swap drives in seconds, and both a USB Type-C and a USB 3.1 Type-A cable are included for broad host compatibility.

Check before you buy

The adapter reaches its quoted 10 Gbps NVMe or 6 Gbps SATA throughput only when the host port supports USB 3.2 Gen 2 or Thunderbolt 3; older USB 3.0 ports will limit speeds to roughly 500 MB/s. New SSDs must be initialised in the operating system’s disk management utility before they appear, and the enclosure does not work with mSATA, PCIe AHCI or non-M.2 form factors.

Kohokohdat

  • Tool-free installation swaps M.2 SSDs in seconds
  • RTL9210B chipset delivers 10 Gbps NVMe and 6 Gbps SATA speeds
  • Aluminium shell dissipates heat and triggers thermal protection to protect the drive
  • Supports M.2 2230, 2242, 2260 and 2280 NVMe or SATA SSDs
  • Works with Windows, macOS, Linux and Android via USB-C or USB-A cables

Tekniset tiedot

BrandSokiwi
ModelSKUD0501-US
ColorGray
Dimensions3.7 in x 1.5 in x 0.4 in
Weight0.109 kilograms

Kysymyksiä tästä tuotteesta

What USB standard does the SKUD0501-US use for NVMe drives and what speed does it cap at?

The adapter connects NVMe SSDs through USB 3.2 Gen 2 at up to 10 Gbps, delivering over 900 MBps on a Thunderbolt 3 or USB 3.2 Gen 2 port.

What physical M.2 lengths and key types fit inside this enclosure?

It accepts 2230, 2242, 2260 and 2280 SSDs with M key or B+M key connectors.

How do you install an SSD in the tool-free enclosure and what step is often missed?

Hold the lock, open the back cover, insert the drive and close the cover; a new SSD must then be initialized in Disk Management before it appears.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.