NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
STARTECH
Adds four USB 3.2 Gen 2 Type-A ports at up to 10 Gbps each via a PCIe x4 slot with dual controllers for up to 20 Gbps total bandwidth
The STARTECH PEXUSB314A2V2 adds four USB Type-A ports running at 10 Gbps each to a desktop or server. It uses two ASM3142 controllers to deliver up to 20 Gbps of aggregate bandwidth across the card. The board fits a standard-profile PCI Express x4 slot or larger and supports Windows, macOS and Linux kernels from 3.5 onward. It targets users who need multiple high-speed connections for external storage or peripherals.
The card draws power from the PCI Express slot and an optional SATA power connector for additional current. Total USB power output is rated at 4.5 W at 5 V and 0.9 A per port under the USB 3.2 Gen 2 specification. No active cooling is present, so the board relies on case airflow for thermal management. Acoustic output is negligible because there are no moving parts on the adapter.
The printed circuit board measures 0.7 by 5.9 by 4.7 inches and weighs 4.4 oz, using a full-profile bracket already installed. Four integrated Type-A ports sit along the rear edge for direct cable attachment. An optional SATA power input sits on the board to supplement slot power when multiple bus-powered devices are connected. The dual-controller layout helps maintain bandwidth when mixed-speed devices are used simultaneously.
| Brand | StarTech.com |
|---|---|
| Model | PEXUSB314A2V2 |
| Type | PCI Express to USB Card |
| External USB Ports | 4 x USB 3.2 USB Type-A (9 pin, Gen 2, 10 Gbps) |
| Standard | USB 3.1 Specification Rev. 1.0 USB Specification Rev. 2.0 PCI Express Base Specification Rev. 2.0 Intel xHCI Specification Rev. 1.1 UASP (USB Attached SCSI Protocol) Rev. 1.0 |
| Data Transfer Rate | USB 3.2 Gen 2 - 10 Gbit/s |
| Operating Systems Supported | Windows 7, 8, 8.1, 10 Windows Server 2012 R2, 2016, 2019 macOS 10.13 to 10.15, 11.0 Linux 3.5 or later LTS version only |
| Compatibility | PCI Express enabled computer or server with a PCI Express x4 slot or higher (x8, x16) Optional SATA power connector Note: This card can share up to 20Gbps of bandwidth (up to 10Gbps, per port). However, the maximum throughput of the card is limited by the maximum throughput of the PCI-Express interface it's connected through The available bandwidth (10Gbps) is shared equally between the two ports. |
| Specifications | Ports: 4 Interface: PCI Express Bus Type: USB 3.2 Gen 2 10Gbps Card Type: Standard Profile Port Style: Integrated on Card Chipset ID: ASMedia - ASM3142, ASMedia - ASM1812 Total USB Power Output: 4.5W (5V @ 0.9A) nominal, per port - Ports trip before 2.1A (10.5W) for Over-Current Protection Maximum Data Transfer Rate: 10Gbps per port Type and Rate: USB 3.2 Gen 2 - 10 Gbit/s UASP Support: Yes MTBF: 40,000 Hours |
| Features | USB PCIe card w/ 4x USB-A up to SuperSpeed 10Gbps per port 2x ASM3142 chips (2 ports/controller) w/ up to 20Gbps total bandwidth USB 3.1/3.2 Gen 2 expansion card Upgraded version of our popular USB card PEXUSB314A2V USB PCI Express adapter card has Multiple INs for max bandwidth w/mixed-speed devices Ideal for SSDs/HDDs/NVMe Optional SATA power for up to 4.5W per port Install add-on card in full profile PCI-e 2.0 x4 slot Windows/Linux/macOS |
| Dimensions | 0.7" x 5.9" x 4.7" |
| Weight | 4.4 oz. |
| Package Contents | USB 3.1 Card Quick-Start Guide Full Profile Bracket (Installed) |
| Lähetyspaino | 0.18 kg |
| Pakkauksen mitat | 207 × 145 × 38 mm |
Insert the card into a PCIe 2.0 x4 or higher slot, secure the full-profile bracket, then connect the optional SATA power cable to deliver up to 4.5W per port; many builders forget the SATA power link.
No scheduled maintenance is required; if a port fails the entire card is replaced since the two ASM3142 controllers and four Type-A ports are soldered on-board.
The PCIe 2.0 x4 host link caps total throughput at 20Gbps, so combined traffic across all four 10Gbps ports cannot exceed that ceiling.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?