NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
STARTECH
Adds four USB 3.2 Gen 2 Type-A ports at up to 10 Gbps each via a PCIe x4 slot with dual controllers for up to 20 Gbps total bandwidth
The STARTECH PEXUSB314A2V2 adds four USB Type-A ports running at 10 Gbps each to a desktop or server. It uses two ASM3142 controllers to deliver up to 20 Gbps of aggregate bandwidth across the card. The board fits a standard-profile PCI Express x4 slot or larger and supports Windows, macOS and Linux kernels from 3.5 onward. It targets users who need multiple high-speed connections for external storage or peripherals.
The card draws power from the PCI Express slot and an optional SATA power connector for additional current. Total USB power output is rated at 4.5 W at 5 V and 0.9 A per port under the USB 3.2 Gen 2 specification. No active cooling is present, so the board relies on case airflow for thermal management. Acoustic output is negligible because there are no moving parts on the adapter.
The printed circuit board measures 0.7 by 5.9 by 4.7 inches and weighs 4.4 oz, using a full-profile bracket already installed. Four integrated Type-A ports sit along the rear edge for direct cable attachment. An optional SATA power input sits on the board to supplement slot power when multiple bus-powered devices are connected. The dual-controller layout helps maintain bandwidth when mixed-speed devices are used simultaneously.
| Brand | StarTech.com |
|---|---|
| Model | PEXUSB314A2V2 |
| Type | PCI Express to USB Card |
| External USB Ports | 4 x USB 3.2 USB Type-A (9 pin, Gen 2, 10 Gbps) |
| Standard | USB 3.1 Specification Rev. 1.0 USB Specification Rev. 2.0 PCI Express Base Specification Rev. 2.0 Intel xHCI Specification Rev. 1.1 UASP (USB Attached SCSI Protocol) Rev. 1.0 |
| Data Transfer Rate | USB 3.2 Gen 2 - 10 Gbit/s |
| Operating Systems Supported | Windows 7, 8, 8.1, 10 Windows Server 2012 R2, 2016, 2019 macOS 10.13 to 10.15, 11.0 Linux 3.5 or later LTS version only |
| Compatibility | PCI Express enabled computer or server with a PCI Express x4 slot or higher (x8, x16) Optional SATA power connector Note: This card can share up to 20Gbps of bandwidth (up to 10Gbps, per port). However, the maximum throughput of the card is limited by the maximum throughput of the PCI-Express interface it's connected through The available bandwidth (10Gbps) is shared equally between the two ports. |
| Specifications | Ports: 4 Interface: PCI Express Bus Type: USB 3.2 Gen 2 10Gbps Card Type: Standard Profile Port Style: Integrated on Card Chipset ID: ASMedia - ASM3142, ASMedia - ASM1812 Total USB Power Output: 4.5W (5V @ 0.9A) nominal, per port - Ports trip before 2.1A (10.5W) for Over-Current Protection Maximum Data Transfer Rate: 10Gbps per port Type and Rate: USB 3.2 Gen 2 - 10 Gbit/s UASP Support: Yes MTBF: 40,000 Hours |
| Features | USB PCIe card w/ 4x USB-A up to SuperSpeed 10Gbps per port 2x ASM3142 chips (2 ports/controller) w/ up to 20Gbps total bandwidth USB 3.1/3.2 Gen 2 expansion card Upgraded version of our popular USB card PEXUSB314A2V USB PCI Express adapter card has Multiple INs for max bandwidth w/mixed-speed devices Ideal for SSDs/HDDs/NVMe Optional SATA power for up to 4.5W per port Install add-on card in full profile PCI-e 2.0 x4 slot Windows/Linux/macOS |
| Dimensions | 0.7" x 5.9" x 4.7" |
| Weight | 4.4 oz. |
| Package Contents | USB 3.1 Card Quick-Start Guide Full Profile Bracket (Installed) |
| Přepravní hmotnost | 0.18 kg |
| Rozměry balení | 207 × 145 × 38 mm |
Insert the card into a PCIe 2.0 x4 or higher slot, secure the full-profile bracket, then connect the optional SATA power cable to deliver up to 4.5W per port; many builders forget the SATA power link.
No scheduled maintenance is required; if a port fails the entire card is replaced since the two ASM3142 controllers and four Type-A ports are soldered on-board.
The PCIe 2.0 x4 host link caps total throughput at 20Gbps, so combined traffic across all four 10Gbps ports cannot exceed that ceiling.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?