NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
STARTECH
Adds four USB 3.2 Gen 2 Type-A ports at up to 10 Gbps each via a PCIe x4 slot with dual controllers for up to 20 Gbps total bandwidth
The STARTECH PEXUSB314A2V2 adds four USB Type-A ports running at 10 Gbps each to a desktop or server. It uses two ASM3142 controllers to deliver up to 20 Gbps of aggregate bandwidth across the card. The board fits a standard-profile PCI Express x4 slot or larger and supports Windows, macOS and Linux kernels from 3.5 onward. It targets users who need multiple high-speed connections for external storage or peripherals.
The card draws power from the PCI Express slot and an optional SATA power connector for additional current. Total USB power output is rated at 4.5 W at 5 V and 0.9 A per port under the USB 3.2 Gen 2 specification. No active cooling is present, so the board relies on case airflow for thermal management. Acoustic output is negligible because there are no moving parts on the adapter.
The printed circuit board measures 0.7 by 5.9 by 4.7 inches and weighs 4.4 oz, using a full-profile bracket already installed. Four integrated Type-A ports sit along the rear edge for direct cable attachment. An optional SATA power input sits on the board to supplement slot power when multiple bus-powered devices are connected. The dual-controller layout helps maintain bandwidth when mixed-speed devices are used simultaneously.
| Brand | StarTech.com |
|---|---|
| Model | PEXUSB314A2V2 |
| Type | PCI Express to USB Card |
| External USB Ports | 4 x USB 3.2 USB Type-A (9 pin, Gen 2, 10 Gbps) |
| Standard | USB 3.1 Specification Rev. 1.0 USB Specification Rev. 2.0 PCI Express Base Specification Rev. 2.0 Intel xHCI Specification Rev. 1.1 UASP (USB Attached SCSI Protocol) Rev. 1.0 |
| Data Transfer Rate | USB 3.2 Gen 2 - 10 Gbit/s |
| Operating Systems Supported | Windows 7, 8, 8.1, 10 Windows Server 2012 R2, 2016, 2019 macOS 10.13 to 10.15, 11.0 Linux 3.5 or later LTS version only |
| Compatibility | PCI Express enabled computer or server with a PCI Express x4 slot or higher (x8, x16) Optional SATA power connector Note: This card can share up to 20Gbps of bandwidth (up to 10Gbps, per port). However, the maximum throughput of the card is limited by the maximum throughput of the PCI-Express interface it's connected through The available bandwidth (10Gbps) is shared equally between the two ports. |
| Specifications | Ports: 4 Interface: PCI Express Bus Type: USB 3.2 Gen 2 10Gbps Card Type: Standard Profile Port Style: Integrated on Card Chipset ID: ASMedia - ASM3142, ASMedia - ASM1812 Total USB Power Output: 4.5W (5V @ 0.9A) nominal, per port - Ports trip before 2.1A (10.5W) for Over-Current Protection Maximum Data Transfer Rate: 10Gbps per port Type and Rate: USB 3.2 Gen 2 - 10 Gbit/s UASP Support: Yes MTBF: 40,000 Hours |
| Features | USB PCIe card w/ 4x USB-A up to SuperSpeed 10Gbps per port 2x ASM3142 chips (2 ports/controller) w/ up to 20Gbps total bandwidth USB 3.1/3.2 Gen 2 expansion card Upgraded version of our popular USB card PEXUSB314A2V USB PCI Express adapter card has Multiple INs for max bandwidth w/mixed-speed devices Ideal for SSDs/HDDs/NVMe Optional SATA power for up to 4.5W per port Install add-on card in full profile PCI-e 2.0 x4 slot Windows/Linux/macOS |
| Dimensions | 0.7" x 5.9" x 4.7" |
| Weight | 4.4 oz. |
| Package Contents | USB 3.1 Card Quick-Start Guide Full Profile Bracket (Installed) |
| Prepravná hmotnosť | 0.18 kg |
| Rozmery balenia | 207 × 145 × 38 mm |
Insert the card into a PCIe 2.0 x4 or higher slot, secure the full-profile bracket, then connect the optional SATA power cable to deliver up to 4.5W per port; many builders forget the SATA power link.
No scheduled maintenance is required; if a port fails the entire card is replaced since the two ASM3142 controllers and four Type-A ports are soldered on-board.
The PCIe 2.0 x4 host link caps total throughput at 20Gbps, so combined traffic across all four 10Gbps ports cannot exceed that ceiling.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?