Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 1U rackmount NAS with four front drive bays, status LEDs, and rear ports

Synology Inc.

Synology RS826RP+ AMD Ryzen V1500B 4-Bay Rackmount NAS 8GB RAM 48TB (4 x 12TB)

SKU CH-57MM-X0KZV

A 1U rackmount NAS with four hot-swappable bays, quad-core AMD Ryzen V1500B processor, 8GB DDR4 RAM, and 48TB of Synology Plus drives pre-installed

  • Port RJ-454 x 10/100/1000M
  • Port USB2 x USB 3.2 Gen 1 Ports
  • Form Factor4-Bay
  • ProcessorAMD Ryzen
  • Installed Memory8GB
  • Included HDD Capacity48TB (4 x 12TB)
  • Quad-core AMD Ryzen V1500B processor at 2.2 GHz handles intensive workloads
  • 8GB DDR4 memory supports smooth multitasking and virtualisation
  • Four 12TB Synology Plus drives provide 48TB of ready-to-use storage
  • Four 1GbE ports with Link Aggregation boost throughput and add failover
  • PCIe Gen3 slot allows 10GbE, 25GbE or M.2 SSD adapter upgrades

Compact 1U rackmount NAS for edge deployments

The Synology RS826RP+ is a 1U rackmount network-attached storage system built for edge deployments, branch offices, and remote business workloads. It ships fully assembled and tested with four 12TB Synology Plus NAS drives providing 48TB of raw capacity. A quad-core AMD Ryzen V1500B processor at 2.2 GHz and 8GB of DDR4 RAM power the platform.

Sustained throughput with link aggregation

Under Synology tested configuration the unit delivers sequential read performance over 2000 MB/s and write performance over 1300 MB/s. Four integrated 1GbE RJ-45 ports support Link Aggregation for increased bandwidth, load balancing, and automatic network failover during sustained operation. A PCIe Gen3 slot accepts 10GbE or 25GbE adapters, an M.2 SSD adapter, or a combined M.2 and 10GbE adapter for caching to improve IOPS. One RX426 expansion unit can be connected to double bay count and reach up to 192 TB raw storage with supported 24 TB drives.

Hot-swap bays and redundant power for daily

Four hot-swappable drive bays accept compatible 3.5-inch SATA hard drives and 2.5-inch SATA SSDs, allowing drive replacement without downtime. Redundant power supplies operate on 100-240 VAC at 50/60Hz for continuous availability. The chassis measures 44 mm × 480 mm × 492.6 mm and weighs 8.0 kg. Management is handled through a web-based interface with DHCP client support, while front LEDs indicate power, drive, and LAN status. Operating limits are 0°C to 35°C at 5-95% relative humidity.

Kohokohdat

  • Quad-core AMD Ryzen V1500B processor at 2.2 GHz handles intensive workloads
  • 8GB DDR4 memory supports smooth multitasking and virtualisation
  • Four 12TB Synology Plus drives provide 48TB of ready-to-use storage
  • Four 1GbE ports with Link Aggregation boost throughput and add failover
  • PCIe Gen3 slot allows 10GbE, 25GbE or M.2 SSD adapter upgrades

Tekniset tiedot

BrandSynology
ModelRS826RP+
Port RJ-454 x 10/100/1000M
Port USB2 x USB 3.2 Gen 1 Ports
Form Factor4-Bay
ProcessorAMD Ryzen
Installed Memory8GB
Included HDD Capacity48TB (4 x 12TB)
ManagementWeb-Based, DHCP Client
LEDsPower, HDD (Hard Disk Drive), LAN (10/100)
Power100-240 VAC 50/60Hz
Temperature0°C - 35 °C
Humidity5-95% R.H
Dimensions44 mm × 480 mm × 492.6 mm
Weight8.0 kg
Package ContentsMain Unit × 1
Accessory Pack × 1
AC Power Cord × 1
All Configuration Items

Kysymyksiä tästä tuotteesta

How much heat and noise does the AMD Ryzen V1500B generate during continuous operation?

The unit operates in 0°C to 35°C ambient temperature and fits a 1U 44 mm rack height, so airflow and acoustic output stay within typical data-centre limits for this form factor

Which drives and memory are required to start using the RS826RP+?

Four 12 TB Synology Plus SATA drives and 8 GB DDR4 RAM are already installed, so no additional components are needed for initial deployment

Can I keep my existing RX426 expansion unit and 1 GbE network switches with this NAS?

Yes, the RS826RP+ connects to one RX426 for up to eight bays and uses four RJ-45 10/100/1000M ports compatible with current 1 GbE infrastructure

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.