Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

TRENDnet

TRENDnet TPE-S44 8-port 10/100 PoE switch 4 PoE 30W 1.6Gbps

SKU CH-889Q-6NQRJ MPN TPE-S44

An 8-port 10/100 unmanaged switch with four PoE ports delivering up to 30 W total power budget and 1.6 Gbps switching capacity

  • FormatExternal
  • StandardsIEEE802.3, IEEE802.3u, IEEE802.3af
  • Network Management TypeUnmanaged
  • Uplink PortsNone
  • Primary Ports4 x 10/100Mbps Auto-MDIX POE Ports (1~4) 4 x 10/100Mbps Auto
  • Primary Port Speed10/100Mbps

Model TPE-S44

Näytä 4 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Powers four devices with 30 W PoE budget
  • Eight Fast Ethernet ports at 10/100 Mbps speed
  • 6 Gbps switching capacity handles traffic
  • Unmanaged plug-and-play setup needs no configuration
  • Sturdy metal housing protects internal components

8-port 10/100 PoE switch

The TRENDnet TPE-S44 is an unmanaged Layer 2 switch with eight Fast Ethernet ports. Four ports deliver Power over Ethernet to compatible devices such as IP cameras or wireless access points. A 30 W total power budget is shared across the PoE ports. The metal enclosure supports plug-and-play deployment without configuration.

Suits small PoE deployments, not managed networks

This switch fits installations that need a few powered ports and simple connectivity. It lacks uplink ports, SNMP, QoS, LACP and port mirroring, so administrators who require traffic prioritisation, link aggregation or remote monitoring should consider a managed alternative. Jumbo frames are not supported.

30 W budget and 1.6 Gbps switching capacity

The 30 W PoE budget comfortably handles several Class 3 devices but will not power multiple high-draw units simultaneously. Switching capacity of 1.6 Gbps provides adequate headroom for typical 10/100 Mbps traffic loads. All ports operate at Fast Ethernet speeds using Cat 5 or better cabling.

Kohokohdat

  • Powers four devices with 30 W PoE budget
  • Eight Fast Ethernet ports at 10/100 Mbps speed
  • 6 Gbps switching capacity handles traffic
  • Unmanaged plug-and-play setup needs no configuration
  • Sturdy metal housing protects internal components

Tekniset tiedot

BrandTRENDnet
ModelTPE-S44
FormatExternal
StandardsIEEE802.3, IEEE802.3u, IEEE802.3af
Network Management TypeUnmanaged
Uplink PortsNone
Primary Ports4 x 10/100Mbps Auto-MDIX POE Ports (1~4)
4 x 10/100Mbps Auto-MDIX Fast Ethernet Ports (5 ~8)
Primary Port Speed10/100Mbps
Switching MethodStore and Forward
Jumbo FramesNo
ProtocolsCSMA/CD
PoEYes
StackableNo
SNMPNo
QoSNo
LACPNo
LayerLayer 2 Only
Port MirroringNo
Module SupportNo
Cabling10Mbps: Cat 3,4,5 Unshielded Cable
100Mbps: Cat 5, 5E, 6 Unshielded Cable
TopologyStar
LEDsPer Unit: Power, Power MAX
Per Port: Link/Activity, Speed
PoE: PoE Status, Link/Activity, Speed
Power48V DC 0.8A External Power Adapter
6.3 watts max (no PD Device connected)
36.3 watts max (with 30w PoE Device connected)
Dimensions6.7" x 3.7" x 1.1"
Weight13.8 oz.
Temperature0°C to 40°C (32°F to 104°F)
Humidity10% - 90%, Non-condensing
FeaturesPower over Ethernet:
Up to 15.4 watts per Port; PD classification Identify
PoE Over Current Protection; PoE Circuit Sorting Protection
PoE Power on RJ-45 pin 3,6 for Power+ and pin 1,2 for Power
IEEE 802.3af Power over Ethernet (PoE) Standard Compliant
8 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports
Built-in 4 PoE Ports (Port 1 ~ Port 4)
Supports PoE Power Maximum 15.4 watts for each POE port
Supports PoE Powered Device(PD) classification identify
Full Wire-Speed Non-Blocking Reception and Transmission
96Kbytes RAM Data Buffer and 1K entries MAC Address Table
E
Package ContentsTPE-S44
USB Extension Cable
Driver Disk
Lähetyspaino0.91 kg
Pakkauksen mitat290 × 246 × 66 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What type of Ethernet cable is required to use the 100Mbps ports on the TPE-S44?

The 100Mbps ports require Cat 5, 5E or 6 unshielded cable for proper operation.

Can the TPE-S44 pass traffic to a legacy 10Mbps device connected to one of its ports?

Yes, the switch supports 10Mbps operation using Cat 3, 4 or 5 unshielded cable on any port.

How can I verify that a powered device is receiving PoE from ports 1 to 4 on the TPE-S44?

Connect the device to ports 1 through 4; if it powers on and establishes a network link, PoE is being delivered within the 30W total budget.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.