Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Vertiv

Vertiv PSI5-1000RM1201U_ 1000VA 900W 120V 1U UPS

SKU CH-KEFP-6RF74 MPN PSI5-1000RM1201U_

1U rack-mount UPS delivering 1000VA/900W pure sine wave output with AVR, .9 power factor and two programmable outlets

  • International Version120V
  • Input Voltage Range75-146 VAC
  • Input Connection5-15P
  • VA Rating1000 VA
  • Watts900W
  • Output Voltage120 VAC (100/110/115/125 VAC user-configurable)
  • AVR corrects voltage fluctuations from 75 to 146 VAC
  • 1U rack height saves space versus typical 2U units
  • 9 power factor delivers 900 W from 1000 VA rating
  • Two programmable outlets let you prioritise critical loads
  • Pure sine wave output on battery protects sensitive IT equipment

1U rack-mount UPS for network closets

The Vertiv PSI5-1000RM1201U is a line-interactive uninterruptible power supply rated at 1000 VA and 900 W. It occupies a single 1U rack space while delivering pure sine wave output on battery. The unit suits servers, routers, storage arrays and VoIP gear in tight rack environments.

Replaces bulkier 2U units when rack space is scarce

Automatic Voltage Regulation corrects input fluctuations between 75 and 146 VAC without using battery capacity. The 0.9 power factor provides more usable wattage for connected loads than lower-factor designs. Upgrade when existing UPS hardware cannot fit a 1U slot or lacks programmable outlet control.

Runtime drops sharply as load approaches 900 W

At full 900 W the battery lasts five minutes; at 450 W it extends to 13 minutes. Output voltage is user-configurable to 100, 110, 115, 120 or 125 VAC. Remote monitoring requires an optional communication card inserted into the IntelliSlot port.

Kohokohdat

  • AVR corrects voltage fluctuations from 75 to 146 VAC
  • 1U rack height saves space versus typical 2U units
  • 9 power factor delivers 900 W from 1000 VA rating
  • Two programmable outlets let you prioritise critical loads
  • Pure sine wave output on battery protects sensitive IT equipment

Tekniset tiedot

BrandVertiv
SeriesPSI5
ModelPSI5-1000RM1201U
International Version120V
Input Voltage Range75-146 VAC
Input Connection5-15P
VA Rating1000 VA
Watts900W
Output Voltage120 VAC (100/110/115/125 VAC user-configurable)
Outlets5
Outlet Type5-15R
Battery Run Time900W: 5 min
450W: 13 min
Interface PortUSB, EPO Terminals
Rackmountable1U
FeaturesCompact 1U rack space for the same features as a 2U rack mount UPS
Advanced, pure sine wave output power on battery
0.9 power factor, which means more usable power for connected devices
Voltage regulation from 83 to 159 VAC without using the battery
Less than 6 milliseconds transfer time to battery
LCD display panel, output overload, or low-battery or replace-battery warnings
Lähetyspaino18.51 kg
Pakkauksen mitat594 × 561 × 140 mm

Kysymyksiä tästä tuotteesta

What rack height and mounting hardware does the 1U UPS require?

The unit fits a standard 1U rack space and ships with rack mounting hardware included for installation.

How do you connect the USB interface and EPO terminals during setup?

Plug the USB cable into the UPS port and a host system; wire the EPO terminals to an emergency power-off circuit if required by your safety plan.

When should the internal battery be replaced based on the listed run times?

Plan replacement when a 900 W load drops below 5 minutes or a 450 W load falls under 13 minutes of backup.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.