Vertiv
Vertiv PSI5-1000RM1201U_ 1000VA 900W 120V 1U UPS
1U rack-mount UPS delivering 1000VA/900W pure sine wave output with AVR, .9 power factor and two programmable outlets
- International Version120V
- Input Voltage Range75-146 VAC
- Input Connection5-15P
- VA Rating1000 VA
- Watts900W
- Output Voltage120 VAC (100/110/115/125 VAC user-configurable)
- AVR corrects voltage fluctuations from 75 to 146 VAC
- 1U rack height saves space versus typical 2U units
- 9 power factor delivers 900 W from 1000 VA rating
- Two programmable outlets let you prioritise critical loads
- Pure sine wave output on battery protects sensitive IT equipment
1U rack-mount UPS for network closets
The Vertiv PSI5-1000RM1201U is a line-interactive uninterruptible power supply rated at 1000 VA and 900 W. It occupies a single 1U rack space while delivering pure sine wave output on battery. The unit suits servers, routers, storage arrays and VoIP gear in tight rack environments.
Replaces bulkier 2U units when rack space is scarce
Automatic Voltage Regulation corrects input fluctuations between 75 and 146 VAC without using battery capacity. The 0.9 power factor provides more usable wattage for connected loads than lower-factor designs. Upgrade when existing UPS hardware cannot fit a 1U slot or lacks programmable outlet control.
Runtime drops sharply as load approaches 900 W
At full 900 W the battery lasts five minutes; at 450 W it extends to 13 minutes. Output voltage is user-configurable to 100, 110, 115, 120 or 125 VAC. Remote monitoring requires an optional communication card inserted into the IntelliSlot port.
Punti di forza
- AVR corrects voltage fluctuations from 75 to 146 VAC
- 1U rack height saves space versus typical 2U units
- 9 power factor delivers 900 W from 1000 VA rating
- Two programmable outlets let you prioritise critical loads
- Pure sine wave output on battery protects sensitive IT equipment
Caratteristiche tecniche
| Brand | Vertiv |
|---|---|
| Series | PSI5 |
| Model | PSI5-1000RM1201U |
| International Version | 120V |
| Input Voltage Range | 75-146 VAC |
| Input Connection | 5-15P |
| VA Rating | 1000 VA |
| Watts | 900W |
| Output Voltage | 120 VAC (100/110/115/125 VAC user-configurable) |
| Outlets | 5 |
| Outlet Type | 5-15R |
| Battery Run Time | 900W: 5 min 450W: 13 min |
| Interface Port | USB, EPO Terminals |
| Rackmountable | 1U |
| Features | Compact 1U rack space for the same features as a 2U rack mount UPS Advanced, pure sine wave output power on battery 0.9 power factor, which means more usable power for connected devices Voltage regulation from 83 to 159 VAC without using the battery Less than 6 milliseconds transfer time to battery LCD display panel, output overload, or low-battery or replace-battery warnings |
| Peso di spedizione | 18.51 kg |
| Dimensioni del pacco | 594 × 561 × 140 mm |
Domande su questo articolo
What rack height and mounting hardware does the 1U UPS require?
The unit fits a standard 1U rack space and ships with rack mounting hardware included for installation.
How do you connect the USB interface and EPO terminals during setup?
Plug the USB cable into the UPS port and a host system; wire the EPO terminals to an emergency power-off circuit if required by your safety plan.
When should the internal battery be replaced based on the listed run times?
Plan replacement when a 900 W load drops below 5 minutes or a 450 W load falls under 13 minutes of backup.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 USD
0.00051731BTC
Disponibile