Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone duplicator with blue LCD display and three drive trays

VinPower

VinPower HDDSharkTB-2T-BK 1-to-2 Hard Drive Duplicator

SKU CH-AZVY-EE55X MPN HDDSharkTB-2T-BK

Standalone duplicator clones one SATA drive to two targets at up to 150 MB/s with 128 MB buffer and built-in cooling fan

  • TypeHard Drive Duplicator
  • Target1 to 2
  • Buffer Memory128M
  • Display20 x 2 Blue LCD
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 2

  • 128 MB buffer memory speeds up duplication
  • Standalone operation copies drives without a PC
  • 150 MB/sec maximum transfer rate for fast clones
  • Dedicated cooling fan prevents overheating during long runs
  • Aluminium chassis with heat-conductive grooves aids thermal management

What the duplicator does

The VinPower HDDSharkTB-2T-BK is a standalone hard drive duplicator that copies one source drive to two target drives simultaneously. It operates without a host computer and supports SATA drives at 1.5Gbps, 3.0Gbps and 6.0Gbps speeds. The unit includes 128M buffer memory and a 20 x 2 blue LCD for status feedback. It is suited for IT departments or service providers needing reliable sector-by-sector cloning.

Interface speed and file-system limits

Maximum sustained throughput reaches 150MB/sec across the SATA interface. The controller handles FAT16, FAT32, extFAT, NTFS and ext2/3/4 file systems, copying data regardless of the operating system on the source drive. Drives larger than the controller’s addressing range or using unsupported partition schemes will not clone correctly. The duplicator does not convert file systems or resize partitions during the copy process.

Checks before ordering

Verify that every drive you intend to use has a standard SATA data and power connector and fits the tray-load bays measuring 8.50" x 7.50" x 12.00". Confirm your source and target drives use one of the supported file systems listed above. The unit draws power from a 90-240 V supply rated up to 500 watts; ensure your outlet and power cord meet that range. Optional CF card support requires a separate interface module not included with this model.

Kohokohdat

  • 128 MB buffer memory speeds up duplication
  • Standalone operation copies drives without a PC
  • 150 MB/sec maximum transfer rate for fast clones
  • Dedicated cooling fan prevents overheating during long runs
  • Aluminium chassis with heat-conductive grooves aids thermal management

Tekniset tiedot

BrandVINPOWER
ModelHDDSharkTB-2T-BK
TypeHard Drive Duplicator
Target1 to 2
Buffer Memory128M
Display20 x 2 Blue LCD
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Dimensions (H x W x D)8.50" x 7.50" x 12.00"
Load TypeTray
FeaturesAluminum design with heat conductive grooves
Optional CF Support with optional CF Interface Module Add-on
Dedicated HDD Cooling Fan to prevent overheating
Support of all SATA Interface, 1.5Gbps, 3.0Gbps, 6.0Gbps
Industry Leading 150MB/s (9GB/min) Simultaneous Actual Transfer Speed
Screw-Free Hot Swappable HDD Caddy Tray
Safety HDD Tray Lock to prevent accidental HDD removal during operation
Additional LED for HDD Power and HDD Activity, Fan Activity
Power Control of individual HDD for complete HDD spin-down prior removal
2.50" and 3.50" HDD / SSD Support
Power Supply90 - 240 V, Up to 500 Watts max
Lähetyspaino4.08 kg
Pakkauksen mitat381 × 279 × 267 mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose this 1-to-2 duplicator or a larger multi-target model?

This unit copies one source drive to two targets simultaneously; if you only need to duplicate small batches, the two-bay design keeps the footprint compact at 8.50" x 7.50" x 12.00".

What does the 150 MB/sec copy speed mean when I run a job?

The duplicator can sustain up to 150 MB/sec per target, so a 1 TB drive finishes in roughly two hours, limited by the slowest drive in the pair.

Which SATA standards does the duplicator support and what speed ceiling do they impose?

It handles SATA 1.5 Gbps, 3.0 Gbps and 6.0 Gbps, so the practical ceiling is 6.0 Gbps — drives negotiate the highest common rate automatically.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.