Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black rectangular desktop duplicator with 31 card slots and a blue LCD display

VinPower

VinPower SDShark-31T-BK 31-target SD/MicroSD duplicator

SKU CH-7XD5-K8WMD MPN SDShark-31T-BK

Standalone duplicator copies one SD or microSD master to 31 targets asynchronously with 128 MB buffer and blue LCD

  • TypeSD/MicroSD Duplicator
  • Target1 to 31
  • Buffer Memory128M
  • Supported MediaMost currently available SD, SDHC, microSD, microSDHC Card
  • Display20 x 2 Blue LCD
  • Operating TypeStandalone

Target 1 to 31

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Copies 31 cards at once without a PC
  • 128 MB buffer keeps each copy running independently
  • Blue 20×2 LCD shows status at a glance
  • Handles SD, SDHC, microSD and microSDHC media
  • Runs on 90–240 V AC worldwide power

31-target standalone duplicator

The VinPower SDShark-31T-BK duplicates one master SD or microSD card onto up to 31 targets without a computer. It suits service bureaus, schools and OEM prep lines that need high-volume flash-media replication in a self-contained unit.

128 MB buffer enables asynchronous copy

Each target slot operates independently thanks to 128 MB of onboard buffer memory, so the duplicator can write different card capacities simultaneously without slowing the fastest slot. This architecture removes the bottleneck found in synchronous designs.

Runs on 90-240 V AC with 20 x 2 blue LCD

The unit plugs into worldwide mains power and shows job status on a built-in 20 x 2 blue LCD. Its 18.50 x 7.50 x 21.00 inch footprint fits a bench or rack shelf, freeing a workstation that would otherwise be tied up running copy software.

Kohokohdat

  • Copies 31 cards at once without a PC
  • 128 MB buffer keeps each copy running independently
  • Blue 20×2 LCD shows status at a glance
  • Handles SD, SDHC, microSD and microSDHC media
  • Runs on 90–240 V AC worldwide power

Tekniset tiedot

BrandVINPOWER
ModelSDShark-31T-BK
TypeSD/MicroSD Duplicator
Target1 to 31
Buffer Memory128M
Supported MediaMost currently available SD, SDHC, microSD, microSDHC Card
Display20 x 2 Blue LCD
Operating TypeStandalone
Dimensions (H x W x D)18.50" x 7.50" x 21.00"
FeaturesComplete Standalone Operation:
No PC required to operate the duplicator.
Asynchronous Duplication:
Able to copy any size master data onto multiple sources asynchronously (independently) without sacrificing duplication speed or quality for faster and more reliable duplication.
Smart copy feature:
This feature is used to quickly copy all accessible content contained on the SD/microSD device.
Supports all data Formats with bit by bit duplication
Supports most currently available SD/microSD drive:
Supports most currently available SD/microSD drive in the market
Future functions upgradeab
Power Supply90 - 240 V AC
Lähetyspaino12.70 kg
Pakkauksen mitat660 × 635 × 330 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How does the 128M buffer affect copy speed when all 31 targets are running?

The 128 megabyte buffer lets each of the 31 target slots pull data independently, so a slow card does not stall the others and the duplicator sustains its maximum throughput across all slots.

What interface does the duplicator use for the cards and what practical limit does it impose?

The unit reads and writes standard SD, SDHC, microSD and microSDHC cards directly through its built-in slots, so the card's own speed class becomes the real-world ceiling.

What clearance does the 18.50 by 7.50 by 21.00 inch chassis need for ventilation and cable access?

Allow at least a few centimetres on the sides and rear for airflow and the IEC power cord; the front panel and card slots remain fully accessible with zero overhang.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.