暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rectangular desktop duplicator with 31 card slots and a blue LCD display

VinPower

VinPower SDShark-31T-BK 31-target SD/MicroSD duplicator

SKU CH-7XD5-K8WMD MPN SDShark-31T-BK

Standalone duplicator copies one SD or microSD master to 31 targets asynchronously with 128 MB buffer and blue LCD

  • TypeSD/MicroSD Duplicator
  • Target1 to 31
  • Buffer Memory128M
  • Supported MediaMost currently available SD, SDHC, microSD, microSDHC Card
  • Display20 x 2 Blue LCD
  • Operating TypeStandalone

Target 1 to 31

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies 31 cards at once without a PC
  • 128 MB buffer keeps each copy running independently
  • Blue 20×2 LCD shows status at a glance
  • Handles SD, SDHC, microSD and microSDHC media
  • Runs on 90–240 V AC worldwide power

31-target standalone duplicator

The VinPower SDShark-31T-BK duplicates one master SD or microSD card onto up to 31 targets without a computer. It suits service bureaus, schools and OEM prep lines that need high-volume flash-media replication in a self-contained unit.

128 MB buffer enables asynchronous copy

Each target slot operates independently thanks to 128 MB of onboard buffer memory, so the duplicator can write different card capacities simultaneously without slowing the fastest slot. This architecture removes the bottleneck found in synchronous designs.

Runs on 90-240 V AC with 20 x 2 blue LCD

The unit plugs into worldwide mains power and shows job status on a built-in 20 x 2 blue LCD. Its 18.50 x 7.50 x 21.00 inch footprint fits a bench or rack shelf, freeing a workstation that would otherwise be tied up running copy software.

特長

  • Copies 31 cards at once without a PC
  • 128 MB buffer keeps each copy running independently
  • Blue 20×2 LCD shows status at a glance
  • Handles SD, SDHC, microSD and microSDHC media
  • Runs on 90–240 V AC worldwide power

仕様

BrandVINPOWER
ModelSDShark-31T-BK
TypeSD/MicroSD Duplicator
Target1 to 31
Buffer Memory128M
Supported MediaMost currently available SD, SDHC, microSD, microSDHC Card
Display20 x 2 Blue LCD
Operating TypeStandalone
Dimensions (H x W x D)18.50" x 7.50" x 21.00"
FeaturesComplete Standalone Operation:
No PC required to operate the duplicator.
Asynchronous Duplication:
Able to copy any size master data onto multiple sources asynchronously (independently) without sacrificing duplication speed or quality for faster and more reliable duplication.
Smart copy feature:
This feature is used to quickly copy all accessible content contained on the SD/microSD device.
Supports all data Formats with bit by bit duplication
Supports most currently available SD/microSD drive:
Supports most currently available SD/microSD drive in the market
Future functions upgradeab
Power Supply90 - 240 V AC
配送重量12.70 kg
梱包サイズ660 × 635 × 330 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How does the 128M buffer affect copy speed when all 31 targets are running?

The 128 megabyte buffer lets each of the 31 target slots pull data independently, so a slow card does not stall the others and the duplicator sustains its maximum throughput across all slots.

What interface does the duplicator use for the cards and what practical limit does it impose?

The unit reads and writes standard SD, SDHC, microSD and microSDHC cards directly through its built-in slots, so the card's own speed class becomes the real-world ceiling.

What clearance does the 18.50 by 7.50 by 21.00 inch chassis need for ventilation and cable access?

Allow at least a few centimetres on the sides and rear for airflow and the IEC power cord; the front panel and card slots remain fully accessible with zero overhang.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。