Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Aluminium USB 3.0 enclosure for M.2 NGFF SSD

ZTC

ZTC Thunder Enclosure NGFF M.2 SSD USB 3.0 Aluminium 5 Size Board

SKU CH-DSE6-T2H1D

Aluminium enclosure converts an NGFF M.2 SSD to USB 3.0 for cloning, backup or portable storage

  • External InterfaceUSB 1.1
  • Converts M.2 NGFF SSD to USB 3.0 external storage
  • Supports USB 3.0 interface for up to 6 Gb/s transfer
  • Aluminium shell provides durable, shock-resistant protection
  • Compatible with five M.2 board sizes for versatile use
  • Works with Windows and macOS for broad system support

Thunder Enclosure for NGFF M.2 SSDs

The ZTC Thunder Enclosure lets you connect a NGFF M.2 solid-state drive to a USB port, turning an internal module into portable storage. It is aimed at users who need to clone drives, migrate data or back up files between computers without installing the SSD internally. Compatible with Windows and macOS systems.

Aluminium shell and tool-free board support

The enclosure uses an aluminium housing that acts as a heatsink for the drive while protecting it from physical shock during transport. It accepts five different M.2 board lengths so you can fit common NGFF sizes without extra spacers or screws. A USB 3.0 cable is used for both data and power, so no separate adapter is required.

Passive cooling with low power draw

Because the aluminium case spreads heat across its surface, the SSD stays within safe temperatures during typical file transfers without any moving parts or fan noise. The USB 3.0 interface supplies enough current for most NGFF drives, keeping power consumption modest and avoiding the need for an external power brick. Performance is limited to USB 1.1 speeds when connected to older ports.

Kohokohdat

  • Converts M.2 NGFF SSD to USB 3.0 external storage
  • Supports USB 3.0 interface for up to 6 Gb/s transfer
  • Aluminium shell provides durable, shock-resistant protection
  • Compatible with five M.2 board sizes for versatile use
  • Works with Windows and macOS for broad system support

Tekniset tiedot

External InterfaceUSB 1.1

Kysymyksiä tästä tuotteesta

What transfer speed does the USB 1.1 interface cap at?

The USB 1.1 interface limits data rates to the 1.1 specification, so real-world throughput stays at USB 1.1 speeds.

What physical size of M.2 board does the enclosure accept?

The enclosure accepts five M.2 board lengths, so you can fit the most common NGFF form factors.

How is the drive secured inside, and what step is often missed?

Slide the M.2 SSD into the slot, fix it with the supplied screw, then snap the aluminium shell closed — forgetting the screw leaves the drive loose.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.