Zyvpee
Zyvpee 3010 30*10mm DC12V 0.04A Hydraulic 3-Wire case fan
A 30 mm hydraulic case fan running on 12 V DC at 0.04 A with a three-wire connector
- TypeCase Fan
- CompatibilityCPU Cooler
- Fan Size30mm
- Bearing TypeHydraulic
- Power Connector3 Wires
- ColorBlack
- 30 mm square fits tight CPU-cooler spaces
- 12 V 0.04 A keeps power draw minimal
- Hydraulic bearing reduces noise and extends life
- Three-wire connector enables speed monitoring
- 10 mm slim profile clears low-profile builds
Compact 30 mm frame for tight CPU coolers
The Zyvpee 3010 fits 30 by 30 by 10 millimetre mounting holes on small-form-factor CPU coolers. It draws 0.04 amps at 12 volts DC through a three-wire connector. The hydraulic bearing and non-LED black frame keep the unit simple for confined builds.
Low airflow headroom for minimal thermal loads
At 0.04 amps the fan moves only a modest volume of air, enough for low-power processors or auxiliary component cooling. It reaches its limit quickly when a CPU sustains higher wattages or when case airflow is restricted. Builders needing greater thermal capacity should look elsewhere.
Three-wire DC control limits speed regulation
The three-wire connector supplies power and a tachometer signal but lacks PWM input, so speed varies only with voltage changes. Motherboards without voltage-based fan headers cannot modulate the fan precisely. This interface also prevents daisy-chaining multiple fans on a single header.
Kohokohdat
- 30 mm square fits tight CPU-cooler spaces
- 12 V 0.04 A keeps power draw minimal
- Hydraulic bearing reduces noise and extends life
- Three-wire connector enables speed monitoring
- 10 mm slim profile clears low-profile builds
Tekniset tiedot
| Series | 3010 |
|---|---|
| Model | 3010 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Fan Size | 30mm |
| Bearing Type | Hydraulic |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 30*30*10mm |
Kysymyksiä tästä tuotteesta
Will the 30mm 3010 fan fit the mounting holes on my existing CPU cooler?
The fan measures 30 by 30 by 10 mm with standard 30 mm mounting spacing, matching most compact CPU cooler brackets.
How can I verify the hydraulic bearing is running correctly after installation?
Spin the blades by hand — they should turn smoothly without grinding — then power on and listen for quiet, steady airflow at 12 V.
Does the package include mounting screws or a 3-pin to 4-pin adapter?
Only the 3010 fan with its 3-wire lead is supplied; screws and any adapter must be sourced separately.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001049BTC
Varastossa