Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small black square 30mm case fan 10mm thick three wire hydraulic bearing

Zyvpee

Zyvpee 3010 30*10mm DC12V 0.04A Hydraulic 3-Wire case fan

SKU CH-9ERZ-P3JXC

A 30 mm hydraulic case fan running on 12 V DC at 0.04 A with a three-wire connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeHydraulic
  • Power Connector3 Wires
  • ColorBlack
  • 30 mm square fits tight CPU-cooler spaces
  • 12 V 0.04 A keeps power draw minimal
  • Hydraulic bearing reduces noise and extends life
  • Three-wire connector enables speed monitoring
  • 10 mm slim profile clears low-profile builds

Compact 30 mm frame for tight CPU coolers

The Zyvpee 3010 fits 30 by 30 by 10 millimetre mounting holes on small-form-factor CPU coolers. It draws 0.04 amps at 12 volts DC through a three-wire connector. The hydraulic bearing and non-LED black frame keep the unit simple for confined builds.

Low airflow headroom for minimal thermal loads

At 0.04 amps the fan moves only a modest volume of air, enough for low-power processors or auxiliary component cooling. It reaches its limit quickly when a CPU sustains higher wattages or when case airflow is restricted. Builders needing greater thermal capacity should look elsewhere.

Three-wire DC control limits speed regulation

The three-wire connector supplies power and a tachometer signal but lacks PWM input, so speed varies only with voltage changes. Motherboards without voltage-based fan headers cannot modulate the fan precisely. This interface also prevents daisy-chaining multiple fans on a single header.

Poudarki

  • 30 mm square fits tight CPU-cooler spaces
  • 12 V 0.04 A keeps power draw minimal
  • Hydraulic bearing reduces noise and extends life
  • Three-wire connector enables speed monitoring
  • 10 mm slim profile clears low-profile builds

Specifikacije

Series3010
Model3010
TypeCase Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeHydraulic
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions30*30*10mm

Vprašanja o tem izdelku

Will the 30mm 3010 fan fit the mounting holes on my existing CPU cooler?

The fan measures 30 by 30 by 10 mm with standard 30 mm mounting spacing, matching most compact CPU cooler brackets.

How can I verify the hydraulic bearing is running correctly after installation?

Spin the blades by hand — they should turn smoothly without grinding — then power on and listen for quiet, steady airflow at 12 V.

Does the package include mounting screws or a 3-pin to 4-pin adapter?

Only the 3010 fan with its 3-wire lead is supplied; screws and any adapter must be sourced separately.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.