Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small black square 30mm case fan 10mm thick three wire hydraulic bearing

Zyvpee

Zyvpee 3010 30*10mm DC12V 0.04A Hydraulic 3-Wire case fan

SKU CH-9ERZ-P3JXC

A 30 mm hydraulic case fan running on 12 V DC at 0.04 A with a three-wire connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeHydraulic
  • Power Connector3 Wires
  • ColorBlack
  • 30 mm square fits tight CPU-cooler spaces
  • 12 V 0.04 A keeps power draw minimal
  • Hydraulic bearing reduces noise and extends life
  • Three-wire connector enables speed monitoring
  • 10 mm slim profile clears low-profile builds

Compact 30 mm frame for tight CPU coolers

The Zyvpee 3010 fits 30 by 30 by 10 millimetre mounting holes on small-form-factor CPU coolers. It draws 0.04 amps at 12 volts DC through a three-wire connector. The hydraulic bearing and non-LED black frame keep the unit simple for confined builds.

Low airflow headroom for minimal thermal loads

At 0.04 amps the fan moves only a modest volume of air, enough for low-power processors or auxiliary component cooling. It reaches its limit quickly when a CPU sustains higher wattages or when case airflow is restricted. Builders needing greater thermal capacity should look elsewhere.

Three-wire DC control limits speed regulation

The three-wire connector supplies power and a tachometer signal but lacks PWM input, so speed varies only with voltage changes. Motherboards without voltage-based fan headers cannot modulate the fan precisely. This interface also prevents daisy-chaining multiple fans on a single header.

Najważniejsze cechy

  • 30 mm square fits tight CPU-cooler spaces
  • 12 V 0.04 A keeps power draw minimal
  • Hydraulic bearing reduces noise and extends life
  • Three-wire connector enables speed monitoring
  • 10 mm slim profile clears low-profile builds

Specyfikacja

Series3010
Model3010
TypeCase Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeHydraulic
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions30*30*10mm

Pytania dotyczące tego produktu

Will the 30mm 3010 fan fit the mounting holes on my existing CPU cooler?

The fan measures 30 by 30 by 10 mm with standard 30 mm mounting spacing, matching most compact CPU cooler brackets.

How can I verify the hydraulic bearing is running correctly after installation?

Spin the blades by hand — they should turn smoothly without grinding — then power on and listen for quiet, steady airflow at 12 V.

Does the package include mounting screws or a 3-pin to 4-pin adapter?

Only the 3010 fan with its 3-wire lead is supplied; screws and any adapter must be sourced separately.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.