OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
A 16 GB DDR3L 1600 registered ECC server module built with major-brand chips at 1.35 V, replacing Hynix HMT42GR7 parts
This 16GB DDR3L 1600 ECC Registered DIMM targets administrators upgrading Hynix-compatible servers and workstations. The module delivers 16GB capacity at PC3L-12800 speed with CL11 latency. Error-correcting code and registered buffering suit multi-socket platforms requiring data integrity. It replaces Hynix HMT42GR7AFR4A-PB, HMT42GR7BFR4A-PB, HMT42GR7DFR4A-PB and HMT42GR7MFR4A-PB parts directly.
The DDR3L standard operates at 1.35V, lower than standard DDR3, so the platform must support low-voltage DIMMs. Registered signalling adds a clock cycle, which affects command timing compared with unbuffered memory. Maximum bus frequency is 1600 MT/s; the memory controller must be qualified for this speed with registered modules. Mixed-voltage populations are not supported by the DDR3L specification.
Verify that your system board lists DDR3L 1600 ECC RDIMM 2Rx4 240-pin DIMMs on its qualified vendor list. Confirm the CPU memory controller supports registered low-voltage modules at this density. Ensure the BIOS revision enables ECC and registered operation for the target slots. Check that no slot population rules forbid 16GB dual-rank modules in your configuration.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This module provides a single 16GB stick at DDR3L 1600 with CL11 latency and 1.35V operation. Select it when your system requires a registered DIMM with 2Rx4 organisation and you need exactly 16GB per slot.
At DDR3L 1600 (PC3L-12800) the memory runs at 1600 MT/s with CL11 timing, giving the rated bandwidth for registered ECC workloads while operating at the low 1.35V voltage.
The 240-pin DDR3L RDIMM interface caps the module at 1600 MT/s and 1.35V; the registered buffer adds one cycle of latency but allows the memory controller to drive larger capacities reliably.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?