NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
A 32 GB DDR4 2933 MHz ECC registered DIMM with 2Rx4 organisation and CL21 latency for server and workstation memory expansion
This 32GB DDR4 2933 registered ECC module is built for servers and workstations that require error-correcting memory. It runs at 1.20V with a CAS latency of 21 and uses a 2Rx4 organisation on a 288-pin DIMM. Major brand chips are used throughout to meet enterprise reliability standards.
This module suits administrators upgrading Hynix HMA84GR7CJR4N-WM, HMA84GR7DJR4N-WM or HMA84GR7JJR4N-WM slots in compatible platforms. It is not for desktop PCs that accept only unbuffered non-ECC UDIMMs, nor for systems limited to lower DDR4 speeds or single-rank configurations. Buyers who need higher capacities per slot or different rank layouts should look at other parts.
The registered ECC design with 2Rx4 ranking is the single specification that determines whether this module will function in a given server or workstation. Memory controllers that require registered DIMMs and support this rank structure will accept it; those that do not will not post with it installed. Verify the platform's qualified vendor list before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR4 voltage of 1.20 V with a CL21 latency, keeping power draw and heat output low for sustained server workloads.
You need a DDR4 DIMM slot (288-pin) and a memory controller that supports registered ECC RDIMMs at 2933 MHz.
Yes, the module will downclock to match the slowest installed DDR4 ECC RDIMM while maintaining registered ECC operation.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?