OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 32 GB DDR4 2933 MHz ECC registered DIMM with 2Rx4 organisation and CL21 latency for server and workstation memory expansion
This 32GB DDR4 2933 registered ECC module is built for servers and workstations that require error-correcting memory. It runs at 1.20V with a CAS latency of 21 and uses a 2Rx4 organisation on a 288-pin DIMM. Major brand chips are used throughout to meet enterprise reliability standards.
This module suits administrators upgrading Hynix HMA84GR7CJR4N-WM, HMA84GR7DJR4N-WM or HMA84GR7JJR4N-WM slots in compatible platforms. It is not for desktop PCs that accept only unbuffered non-ECC UDIMMs, nor for systems limited to lower DDR4 speeds or single-rank configurations. Buyers who need higher capacities per slot or different rank layouts should look at other parts.
The registered ECC design with 2Rx4 ranking is the single specification that determines whether this module will function in a given server or workstation. Memory controllers that require registered DIMMs and support this rank structure will accept it; those that do not will not post with it installed. Verify the platform's qualified vendor list before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR4 voltage of 1.20 V with a CL21 latency, keeping power draw and heat output low for sustained server workloads.
You need a DDR4 DIMM slot (288-pin) and a memory controller that supports registered ECC RDIMMs at 2933 MHz.
Yes, the module will downclock to match the slowest installed DDR4 ECC RDIMM while maintaining registered ECC operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟