אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green 240-pin DDR3 registered DIMM with black chips, 4GB ECC server memory

A-Tech

A-Tech 4GB DDR3 1333MHz ECC RDIMM 2Rx4 for Hynix HMT351V7BMR4C-H9 Server Memory

SKU CH-A8C7-YTK2P

4GB DDR3 1333MHz ECC registered DIMM with 2Rx4 organisation for server upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity lets servers handle larger workloads with a single module
  • DDR3 1333 MHz speed and CL9 latency deliver responsive data access for everyday tasks
  • ECC registered design detects and corrects memory errors to protect data integrity
  • 2Rx4 organisation and 1.5 V operation match the Hynix HMT351V7BMR4C-H9 specification
  • 240-pin DIMM form factor fits standard DDR3 server slots for direct replacement

DDR3 ECC RDIMM for Hynix replacement

This 4 GB DDR3 registered DIMM operates at 1333 MHz with CL9 latency and 1.5 V power. It uses a 2Rx4 organisation and carries ECC for error correction in server and workstation platforms. The module is built as a compatible equivalent for the Hynix HMT351V7BMR4C-H9 part number. All units are tested for reliability before shipment.

Suited for servers needing registered ECC DDR3

Administrators upgrading or repairing systems that require registered ECC memory at the PC3-10600 speed grade will find this module a direct fit. Builders whose platforms accept only unbuffered UDIMMs, or those requiring a different voltage, speed, rank configuration or DDR generation, should select a module matching those specifications. Verify the motherboard qualified-vendor list before ordering.

Registered ECC with 2Rx4 organisation

The registered buffer and ECC circuitry allow the memory controller to address larger capacities while detecting and correcting single-bit errors. Systems that mandate registered DIMMs and a 2Rx4 rank layout will recognise this module; platforms limited to unbuffered memory or a different rank structure will not support it. Check the system documentation for the required registration and rank combination.

נקודות עיקריות

  • 4GB capacity lets servers handle larger workloads with a single module
  • DDR3 1333 MHz speed and CL9 latency deliver responsive data access for everyday tasks
  • ECC registered design detects and corrects memory errors to protect data integrity
  • 2Rx4 organisation and 1.5 V operation match the Hynix HMT351V7BMR4C-H9 specification
  • 240-pin DIMM form factor fits standard DDR3 server slots for direct replacement

מפרט טכני

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT351V7BMR4C-H9
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesHMT351V7BMR4C-H9

שאלות על הפריט הזה

Will the 240-pin DDR3 DIMM slot wear out and need replacement?

The 240-pin DDR3 DIMM socket is a passive connector rated for many insertion cycles; it does not wear out under normal server operation and requires no scheduled replacement.

What limits sustained throughput on this CL9 1333 MHz module?

The CL9 latency at 1333 MHz sets the maximum sustained bandwidth; the memory controller cannot push data faster than the rated PC3-10600 ceiling.

How much heat does a 1.5 V registered ECC module produce running 24/7?

At 1.5 V the module draws standard DDR3 power; registered ECC operation adds minimal overhead, so a normal server airflow path keeps temperatures within spec.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.